Krismc
|
posted on 9/10/11 at 03:27 PM |
|
|
Pedal car wheels ??
Building a Wooden 7 for my little-un, so Im after some 12 inch(or similar) Plastic Pedal car wheels and tyres, only one company i can find with spoked
wheels but they are £42 a set - my budget was £50 for the whole car.!!
And body got any or can point me too right direction, Google is pain in the rrrrrrr's when you put the word wheel!
????
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
Chippy
|
posted on 9/10/11 at 10:22 PM |
|
|
Not spoked, but if I recall correctly "Screwfix" do a range of wheels which may fit the bill. HTH
RayScrewfix
[Edited on 9-10-11 by Chippy]
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
owelly
|
posted on 10/10/11 at 04:56 AM |
|
|
Or try here:
http://www.discount-towing.co.uk/product/230-Jockey_Wheel_Spare_Wheel_260mm
No prices but may be worth a call?:
http://www.plasticwheels.com
[Edited on 10/10/11 by owelly]
http://www.ppcmag.co.uk
|
|
TQ_uk
|
posted on 10/10/11 at 10:20 AM |
|
|
Clas Ohlson ?
Maybe not big enough though...
|
|
Krismc
|
posted on 10/10/11 at 07:31 PM |
|
|
Cheers lad, tried plasticwheels.com, Hughs and screwfix but expensive £13-£28 a wheel plus delivery
£120 for wheels
[Edited on 10/10/11 by Krismc]
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
ReMan
|
posted on 10/10/11 at 07:59 PM |
|
|
Pram wheels not good enough for you?
www.plusnine.co.uk
|
|
l0rd
|
posted on 10/10/11 at 08:09 PM |
|
|
What are you using as stub axles?
I need to make one for mine as well. I was thinking of ATV parts though.
Mega expensive as we do not have many in Greece.
|
|
McLannahan
|
posted on 10/10/11 at 08:30 PM |
|
|
http://www.alwayshobbies.com/Models/Wheeled-Toys/Moulded-Wheels.ice?IPage=0
Not sure if they'll be big enough for you? Largest is 25cm?
[Edited on 10/10/11 by McLannahan]
|
|
owelly
|
posted on 10/10/11 at 09:19 PM |
|
|
I made a go-cart and used some plastic BMX style wheels from a kids scooter but I've also seen pneumatic tyred, pressed steel wheels at
autojumbles for £7 a pair. Same as these but cheaper!
http://www.northerntooluk.com/tyres-and-wheels-and-castors/pneumatic-castors/10in-pneumatic-tyre_wheel-standard_1343E.html
http://www.ppcmag.co.uk
|
|
wilkingj
|
posted on 11/10/11 at 11:14 AM |
|
|
Thought of trying your local Mobility scoorter place for a scrap scooter?
Probably a good donor as well!
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
Krismc
|
posted on 11/10/11 at 04:05 PM |
|
|
Got a scrap scooter already mate, front wheels too small and rears way too big.
tried and looked but no old style prams either at car boot.
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
Krismc
|
posted on 11/10/11 at 04:07 PM |
|
|
quote: Originally posted by owelly
I made a go-cart and used some plastic BMX style wheels from a kids scooter but I've also seen pneumatic tyred, pressed steel wheels at
autojumbles for £7 a pair. Same as these but cheaper!
http://www.northerntooluk.com/tyres-and-wheels-and-castors/pneumatic-castors/10in-pneumatic-tyre_wheel-standard_1343E.html
I making a dainty copy of my 7 in pink for my daughther so them wheels are a little tank ish!!
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|