stevio73
|
| posted on 9/1/14 at 10:15 AM |
|
|
Exhaust silencer
Hi, I'm looking for a suitable silencer for my haynes build running a zzr1100. Would be nice to have something shiney but not too fussy, I did
contemplate making my own but getting hold of stainless tube is tricky.
Quick as a flash...... Nothing happens!
|
|
|
|
|
scutter
|
| posted on 9/1/14 at 10:37 AM |
|
|
I made my Exhausts from Stainless steel fire extinguishers.
 
 
scoop
Works out about £50 per can.
Regards Dan.
The less I worked, the more i liked it.
|
|
|
stevio73
|
| posted on 9/1/14 at 03:04 PM |
|
|
Now, that seems a really good idea. I think I know a place where I can get one of those!
Quick as a flash...... Nothing happens!
|
|
|
loggyboy
|
| posted on 9/1/14 at 03:12 PM |
|
|
I have a 'carbon' R1 can I bought to use on mine, I drilled the rivets hoping to repack it, only to find it welded behind, the rivets were
just there for show. I since bought another with a cat all welded on. The carbon sleave slides off and could be replaced with ally should you wish to
bling it up.
Open to offers.
[Edited on 9-1-14 by loggyboy]
Mistral Motorsport
|
|
|
Steve
|
| posted on 9/1/14 at 08:54 PM |
|
|
I've got one from a busa powered 7 if that's any good I'm not too far away if you want to have a llok
|
|
|
sdh2903
|
| posted on 9/1/14 at 09:13 PM |
|
|
quote:
Originally posted by loggyboy
I have a 'carbon' R1 can I bought to use on mine, I drilled the rivets hoping to repack it, only to find it welded behind, the rivets were
just there for show. I since bought another with a cat all welded on. The carbon sleave slides off and could be replaced with ally should you wish to
bling it up.
Open to offers.
[Edited on 9-1-14 by loggyboy]
Is it an oem carbon can?
If so the whole end comes away with a bit of persuasion once the outer ally end cap rivets are removed. Then you can repack it.
|
|
|
loggyboy
|
| posted on 9/1/14 at 09:23 PM |
|
|
Yeah is oe, but fully stipped off all the end caps down to a bare silencer, which seems to be well welded up.
Mistral Motorsport
|
|
|
aerodynamix
|
| posted on 9/1/14 at 10:19 PM |
|
|
Silencers
If you are thinking of new , we will be updating the website this weekend with Stainless and Carbon 6" Motorsport silencers 
[Edited on 9/1/14 by aerodynamix]
|
|
|
sdh2903
|
| posted on 9/1/14 at 10:30 PM |
|
|
quote:
Originally posted by loggyboy
Yeah is oe, but fully stipped off all the end caps down to a bare silencer, which seems to be well welded up.
Defo comes apart I've done 3 now. Needs some brute force though.
|
|
|
FazerBob
|
| posted on 12/1/14 at 11:53 PM |
|
|
I have a bike can I bought a couple of years ago, but never got round to using it. If I remember rightly it's titanium. Looks like alloy, but
very light, and has a catalyst built in.
PM me if you want more details and pics.
Bob
|
|
|
