Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Anyone using a Race Tech Dash2 with a ZX12 engine?
Antnicuk

posted on 17/3/19 at 09:35 PM Reply With Quote
Anyone using a Race Tech Dash2 with a ZX12 engine?

I have a Race Technologies Dash on my ZX 12 powered Raw Fulcrum. I am having trouble getting the revs to read correctly. I am using the light blue wire from the ecu and if i put it in 1 pulse revolution I am pretty sure its not showing the correct rpm I changed it to 2 pulses and it seems to be a bit more accurate but its very hard to tell. Its also difficult to scale as there are only 9 rpm bands to scale it to. ANy help greatly appreciated





600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!

View User's Profile E-Mail User View All Posts By User U2U Member
peter030371

posted on 18/3/19 at 01:18 PM Reply With Quote
Have you tried Race Technology for help? They have always been helpful when I have contacted them.
View User's Profile View All Posts By User U2U Member
Antnicuk

posted on 20/3/19 at 09:11 PM Reply With Quote
thanks, i emailed them and they responded, looks like i need to move the speed sensor. I think i sorted the revs, i changed it to 2 pulses per revolution.





600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.