theconrodkid
|
| posted on 11/4/08 at 05:56 PM |
|
|
engine dims
anyone got a spare blade/R1 lump kicking around they could measure for me.
what i want is ,if i were to put the lump in a box,what length/width/height would the box be and also the height of the output sprocket from bottom
line of said lump would be handy
who cares who wins
pass the pork pies
|
|
|
|
|
skippad
|
| posted on 11/4/08 at 06:47 PM |
|
|
bec dimensions
hiya
just measured me blade on garage floor.
total length 20"
Width inc. oil filter 19"
total height 24.5"
bottom of sump to sprocket centre 7"
Hope this helps
|
|
|
theconrodkid
|
| posted on 11/4/08 at 07:24 PM |
|
|
cheers mate
who cares who wins
pass the pork pies
|
|
|
airframefixer
|
| posted on 11/4/08 at 07:31 PM |
|
|
Im using an FZ1, almost the same as an R1. same case dimensions but different mounting points, and sidedraft carbs.
footprint is 16x18. height is 19.5. sprocket height is 8 inches above the oil pan. here some pics that may help aswell.
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
|
|
|
theconrodkid
|
| posted on 11/4/08 at 07:44 PM |
|
|
cheers for the pics,gives me something to be getting on with
who cares who wins
pass the pork pies
|
|
|
Puk
|
| posted on 11/4/08 at 08:45 PM |
|
|
If it is any use to you there's 3D model here:
linky to Locost CAD models
Before you judge a guy, walk a mile in his shoes. Then when you judge him, you're a mile a way and you've nicked his shoes.
|
|
|
