G3OFF
|
| posted on 22/7/03 at 09:11 PM |
|
|
Anyone Finished there luego yet?
anyone finished there luego yet?
and got any pics 
no such thing as to much power......
|
|
|
|
|
Mark18
|
| posted on 25/7/03 at 07:52 PM |
|
|
I'm at the other end of the scale - just put a deposit this Tuesday on a Velocity chassis (I.R.S.) with the locost GRP.
"I don't know what I may seem to the world. But as to myself I seem to have been only like a boy playing on the seashore and diverting myself
now and then finding a smoother pebble or a prettier shell than the ordinary, whilst the great ocean of truth lay all undiscovered before me." -
Isaac Newton
|
|
|
Edsanutcase
|
| posted on 27/7/03 at 05:00 PM |
|
|
luego build
Ihave.Passed its SVA.On the road.
 
Rescued attachment new car 036.jpg
|
|
|
chrisg
|
| posted on 27/7/03 at 08:03 PM |
|
|
Looks good mate, you haven't got a bigger picture by any chance?
Just kidding
Cheers
Chris
Note to all: I really don't know when to leave well alone. I tried to get clever with the mods, then when they gave me a lifeline to see the
error of my ways, I tried to incite more trouble via u2u. So now I'm banned, never to return again. They should have done it years ago!
|
|
|
Stu16v
|
| posted on 27/7/03 at 10:03 PM |
|
|
quote:
Looks good mate, you haven't got a bigger picture by any chance?
ROTFLMAO!!!!!
Fine looking car...
Dont just build it.....make it!
|
|
|
Peteff
|
| posted on 28/7/03 at 08:59 AM |
|
|
Used your photo editing prog to crop and resize then put it on at a smaller size. It will load quicker, probably save Chris some bandwidth and save
you the job of painting the wall behind it .
yours, Pete.
[Edited on 28/7/03 by Peteff]
 
Rescued attachment new car 036.jpg
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
Edsanutcase
|
| posted on 28/7/03 at 08:37 PM |
|
|
Thanks Pete.
Ed.
|
|
|
G3OFF
|
| posted on 30/7/03 at 06:31 PM |
|
|
looks nice mate.... well done...
anyone else finished....?
no such thing as to much power......
|
|
|
ChrisW
|
| posted on 31/7/03 at 07:45 AM |
|
|
Fat chance! Still saving up for my master cylinders!
Chris
My gaff my rules
|
|
|
G3OFF
|
| posted on 31/7/03 at 06:48 PM |
|
|
how far along are you now chris?
no such thing as to much power......
|
|
|
tobyg
|
 posted on 3/9/03 at 06:13 PM |
|
|
i have finished my viento! got sva on friday
|
|
|
tobyg
|
| posted on 3/9/03 at 06:15 PM |
|
|
the pictures are on my website www.golder.org under tobys pictures!!!
|
|
|
G3OFF
|
| posted on 3/9/03 at 06:22 PM |
|
|
looks nice mate.. iv put some pics of it on the luego site.. under customers build section....
mines still not finished..  how did you find the SVA
no such thing as to much power......
|
|
|
ChrisW
|
| posted on 3/9/03 at 07:38 PM |
|
|
Suspension is all done, lighting loom is in, been painting up all the engine and gearbox bits today so I can hopefully tack up some mounts for it all
tomorrow.
Calipers are now waiting in the garage until I can afford some flexis and the master cylinders!
Chris
quote:
Originally posted by G3OFF
how far along are you now chris?
[Edited on 3/9/03 by ChrisW]
My gaff my rules
|
|
|
tobyg
|
| posted on 3/9/03 at 09:23 PM |
|
|
ill let u know about my SVA experience on saturday! i have had a good idea about locking the bias bar tonight! hope inspector likes it! it makes
engineering sense!!!
|
|
|
G3OFF
|
| posted on 5/9/03 at 07:26 PM |
|
|
looking good chris..... gettin there mate..
no such thing as to much power......
|
|
|
G3OFF
|
| posted on 7/9/03 at 06:08 PM |
|
|
how did the SVA go.... is it good news..?
no such thing as to much power......
|
|
|
tobygee
|
 posted on 8/9/03 at 09:48 PM |
|
|
it failed!!! but mainly of 2.5mm projections around the front suspension!!! also the cycle wing was around the back of the wheel! he wanted it on
top so i have rectified it but in turn will need some more wings to put them back again! no warning light for fog lamp. track rod covering material
not what major manufacturer would use! litle to no self centering of steered wheels! brake bias bar not locked in position! (to rectify this i drilled
a hole through the top of the threaded part and hammered a roll pin in it!) and emissions!
apart from that he was pleased with the build!!!
back there on wed morn! got VLO coming round tommorow! insured! with any luck ill be at donnington on sunday!
|
|
|
Edsanutcase
|
| posted on 18/9/03 at 10:50 PM |
|
|
looks good,Toby,how did the retest go.
|
|
|
tobygee
|
| posted on 6/10/03 at 05:34 PM |
|
|
all passed! running it in now and started rebuilding my v8 to go in!!!
|
|
|
G3OFF
|
| posted on 6/10/03 at 06:21 PM |
|
|
excellent... congratulations m8
no such thing as to much power......
|
|
|
fastavatar.jpg){kind=avatar}
