Steve Lovelock
|
| posted on 24/3/08 at 06:20 PM |
|
|
Velocity development - at last
Hi,
I realise that a lot of people will be getting stuff done during the fantastic four day holiday but I thought I'd post some pictures of my car
now that I have made some progress at long last.
I have few of them in the post but here are a few of the highlights:
|
|
|
|
|
Steve Lovelock
|
| posted on 24/3/08 at 06:21 PM |
|
|
How do I post pictures?
|
|
|
dave1888
|
| posted on 24/3/08 at 06:26 PM |
|
|
Stick them in your archive or use the browse button at the bottom of the reply page
|
|
|
Steve Lovelock
|
| posted on 24/3/08 at 07:00 PM |
|
|
|
|
|
Steve Lovelock
|
| posted on 24/3/08 at 08:03 PM |
|
|
3rd time lucky
 
Rescued attachment DSC01732b.JPG
|
|
|
Steve Lovelock
|
| posted on 24/3/08 at 08:04 PM |
|
|
4th
 
Rescued attachment DSC01736b.JPG
|
|
|
Steve Lovelock
|
| posted on 24/3/08 at 08:05 PM |
|
|
5th
 
Rescued attachment DSC01743a.JPG
|
|
|
Steve Lovelock
|
| posted on 24/3/08 at 08:06 PM |
|
|
6th
 
Rescued attachment DSC01744a.JPG
|
|
|
jollygreengiant
|
| posted on 24/3/08 at 08:07 PM |
|
|
Looking good there Steve.
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
Dave Bailey
|
| posted on 24/3/08 at 08:17 PM |
|
|
Steve...really spooky! it feels that I am looking at my own build in a lot of cases!
I have done many things in the same way.... The extension for the gear lever, the nose cone hinge etc etc etc..
nice job!
Dave B
|
|
|
Dave Bailey
|
| posted on 24/3/08 at 08:37 PM |
|
|
U2U sent!
|
|
|
craig_007
|
| posted on 25/3/08 at 04:38 PM |
|
|
HI Steve,
Where did you get the carbon dash about,I'm after something similar
Craig
|
|
|
Steve Lovelock
|
| posted on 25/3/08 at 05:10 PM |
|
|
I made the dash out of carbon effect plastic from esp plastics.
http://www.esp-plastics.co.uk/
I know the purists get offended by abs type plastic but it looks good and is easy to use.
|
|
|
saigonij
|
| posted on 25/3/08 at 05:51 PM |
|
|
did you get the 4mm thick version?
I had the 2.5mm thick version i think and its very flimsy
|
|
|
Steve Lovelock
|
| posted on 25/3/08 at 06:03 PM |
|
|
I did use the 4mm version for the dash and then stuck it to aluminium sheet for extra strength. It is still flexible. I have bought some thinner
sheet for things like the wheel arch protectors and the rear shelf/boot cover. Subsequently changed my mind on the rear shelf though due to potential
petrol problems.
|
|
|
