Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: robin hood 2b questions
786evo8

posted on 3/2/11 at 09:51 AM Reply With Quote
robin hood 2b questions

hi guys,

firstly a big thank you to this forum. as a newbie ive managed to find loads of info on here!.

but i have a few questions

there’s not much info about the robin hood 2b cars on here. ive been looking on their website but theres no mention of the 2b, only there zero range. so how old is the 2b chassis? ive seen some 2009 registered 2b's so im guessing not that old.

how well rated are they for track use (not the lightweight version as i need road use as well).

what things should i be looking out for if I buy a ready built one?.

any pointer or advise would be a great help!

thanks

jav

[Edited on 3/2/11 by 786evo8]





-------------------------
jav ;-)

MLR evo forum (clicky)

View User's Profile View All Posts By User U2U Member
Macbeast

posted on 3/2/11 at 10:00 AM Reply With Quote
Without having any personal experience, I've heard they are heavy and use the complete Sierra rear axle which weighs a ton in itself.





I'm addicted to brake fluid, but I can stop anytime.

View User's Profile View All Posts By User U2U Member
MikeRJ

posted on 3/2/11 at 10:05 AM Reply With Quote
They are crap in almost every aspect; badly designed and engineered and very heavy. Some poor buggers have made heroic efforts in putting together road cars of reasonable build quality, but IMO they are one of the worst choices you could make for a track car (a Locust might be worse).

The thing you really need to look out for is a different car.


[Edited on 3/2/11 by MikeRJ]

View User's Profile View All Posts By User U2U Member
interestedparty

posted on 3/2/11 at 10:51 AM Reply With Quote
quote:
Originally posted by MikeRJ

The thing you really need to look out for is a different car.






Cruel, but true.





As some day it may happen that a victim must be found,
I've got a little list-- I've got a little list
Of society offenders who might well be underground,
And who never would be missed-- who never would be missed!

View User's Profile E-Mail User View All Posts By User U2U Member
BenB

posted on 3/2/11 at 10:53 AM Reply With Quote
RH 2b:

Advantage: Quite big inside (ie good for big drivers), tend to sell v cheaply

Disadvantage: Heavy, some had a sliding pillar arrangement on the front suspension, the rear arches were made up from an outer GRP "lip" to a single sheet of metal which was a PITA to get right without using loads of filler (even more weight!). Did I mention heavy?

For track day use it would be better than a 2-ton bus but not as good as a "proper" Locost.

I wouldn't put anything I was fond of in an unmodified lightweight. With modifications perhaps. But not without. The harness mountings alone gave me nightmares....

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Andi

posted on 3/2/11 at 11:06 AM Reply With Quote
You need to go to
http://www.rhocar.org

Plenty of 2b stuff there.

View User's Profile E-Mail User View All Posts By User U2U Member
designer

posted on 3/2/11 at 11:35 AM Reply With Quote
I have a 2B.

http://www.shedworks.eu/garage.html

Yes, they are not as light as others, but for me it is ideal. The 2B is one of the bigger 7's, so you sit 'in' it, rather than 'on' it, and with my 2 litres I can do enough, as a high top speed is irrelevant in today,s world.

If you are thinking of one, make sure you get one with wishbone front suspension as most opinions are based on the old sliding pillar front suspension, which was awful.

Any questions? Don't be afraid to ask.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
786evo8

posted on 3/2/11 at 12:25 PM Reply With Quote
thanks for the replies,

i am 6ft4 and around 15 stone so this was one of the reasons i was looking at this model.

im looking at upgrading the engine to a rb25det so weight wasn’t one of my worries. only thing putting me off is due to the comments on chassis design and general suspension setups.

hum i guess i better carry on looking. maybe a mnr rt+ ?





-------------------------
jav ;-)

MLR evo forum (clicky)

View User's Profile View All Posts By User U2U Member
shaft

posted on 3/2/11 at 12:50 PM Reply With Quote
GBS now do a wide bodied varient of their current Zero model as an option. I'm led to believe the interior space is comparable to a 2B so would suit the larger driver.
I'm 6'1", 16st and fit in my normal sized Zero very comfortably, albeit a tad snuggly though! lovfl.

Robin Hood did change into GBS, yes, but the only link left now is the stigma they are fast leaving behind.
I think as more Zero's get on the road, on display at the shows and thrown around the track they'll soon be as popular as the other market leaders in the sub 10k range??
I hope so anyway as i can't fault mine in anyway shape or form.
Skoda did it... So will GBS.

Nick. (proud Zero owner)





my opinion might be wrong you know...

My Zero Build Pics

View User's Profile View All Posts By User U2U Member
tegwin

posted on 3/2/11 at 02:26 PM Reply With Quote
I built a 2B.,.. it was utter crap... heavy, complicated..... dont do it!





------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!

www.verticalhorizonsmedia.tv

View User's Profile Visit User's Homepage View All Posts By User U2U Member
dinosaurjuice

posted on 3/2/11 at 02:36 PM Reply With Quote
just my opinion, but the ZERO is the 2nd best value kitcar on the market. only beaten by the MEV exocet. either would be a good choice, the mev is probably more roomier inside.
View User's Profile E-Mail User View All Posts By User U2U Member
snapper

posted on 3/2/11 at 02:52 PM Reply With Quote
Only real men can build a Robin Hood, it's to complicated for boys.
Ha Ha Ha
I'm going to turn my computer off now and wait a few hours before viewing the replies





I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member
geoff82

posted on 3/2/11 at 03:23 PM Reply With Quote
robin hood 2b

i bought a robin hood 2b kit new in 1999 one of the first, it was so bad i took a 9" angle grinder and cut the chassis up in temper. do not buy one they were rubbish.
View User's Profile View All Posts By User U2U Member
ReMan

posted on 5/2/11 at 09:11 AM Reply With Quote
quote:
Originally posted by geoff82
i bought a robin hood 2b kit new in 1999 one of the first, it was so bad i took a 9" angle grinder and cut the chassis up in temper. do not buy one they were rubbish.


Haha
This should be stickied for all time

View User's Profile Visit User's Homepage View All Posts By User U2U Member
britishtrident

posted on 5/2/11 at 09:56 AM Reply With Quote
quote:
Originally posted by geoff82
i bought a robin hood 2b kit new in 1999 one of the first, it was so bad i took a 9" angle grinder and cut the chassis up in temper. do not buy one they were rubbish.



Yes --- keep death off the roads.





[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]

View User's Profile View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.