umgrybab
|
| posted on 29/11/12 at 11:47 PM |
|
|
Exhaust end roll
Hi,
I'm working towards getting my car ready for IVA but have a few things left on the checklist to go. One of those is the radius of the exhaust
pipe. I know most of the cans you buy come with a rolled lip, but I acquired my car part built off of someone else with a brand new can without a
rolled lip, so where could I get this done? Alternatively, I would like to buy a 90 deg bend stainless pipe that I can get rolled somewhere. Any
ideas?
|
|
|
|
|
blakep82
|
| posted on 29/11/12 at 11:57 PM |
|
|
find one of these the right size ;-) get it welded on
eBay Item
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
umgrybab
|
| posted on 30/11/12 at 12:03 AM |
|
|
Cunning. Not a bad suggestion. I never would have looked at adding a boat tie ring, but it may do the job.
|
|
|
NigeEss
|
| posted on 30/11/12 at 12:50 AM |
|
|
Get in touch with Paul who goes by the member id "907". That's right up his street.
Time is an illusion. Lunchtime doubly so.................Douglas Adams.
|
|
|
Rod Ends
|
| posted on 30/11/12 at 12:53 AM |
|
|
Poundland were selling boy-racer style exhaust trims. Could be used to get thru IVA.
|
|
|
renetom
|
| posted on 30/11/12 at 09:33 AM |
|
|
rolled end
Hi
We used a bike can , a 90 degree elbow , & a straight chrome exhaust trim
Which you can find anywhere.
 
IVA exhaust with cat
Good luck.
René
|
|
|
umgrybab
|
| posted on 30/11/12 at 09:47 AM |
|
|
quote:
Originally posted by renetom
Hi
We used a bike can , a 90 degree elbow , & a straight chrome exhaust trim
Which you can find anywhere.
Good luck.
René
That remote shift linkage in the background is reminiscent of the 2cv shifter or "umbrella handle" as some knew it.
|
|
|
renetom
|
| posted on 30/11/12 at 09:54 AM |
|
|
shift
Hi
That's the gearshift lever for the reverse box
We have a paddle shift for the gearbox
ours is a bike engine.
rené
Don't forget the decibels.
[Edited on 30/11/12 by renetom]
|
|
|
