rash12
|
| posted on 30/3/14 at 05:14 PM |
|
|
iva help
could anyone tell me if covers are available for the top balljoint and track rod ends if so where can I get some
thanks in advance
|
|
|
|
|
SteveWallace
|
| posted on 30/3/14 at 05:56 PM |
|
|
If you type 'tower external gland' into the screwfix website you will see some fittings that come with plastic glands. Just get some of
these and cut the ends off to slide over the track rods. Alternatively, if you're going to Stoneleigh I think that one of the trade stands
sells packs of them.
The following picture shows what I used for the top ball joint covers. They are circular wiring connector covers off a BMW in the scrapyard. I was
there for something else so they cost nothing. The bit that's over the threaded adjuster lock nut is a walking stick ferrule.
IVA on Friday so I'll know then whether they are acceptable.
 
Description
 
Description
[Edited on 30/3/14 by SteveWallace]
|
|
|
snapper
|
| posted on 30/3/14 at 06:04 PM |
|
|
Car Builder Solutions have stuff
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
Sloan85
|
| posted on 30/3/14 at 07:07 PM |
|
|
I used 40mm cable gland shrouds for top ball joints.
My build diary
http://mkindygsxr.blogspot.co.uk
|
|
|
