sucksqueezebangblow
|
posted on 16/10/14 at 12:12 PM |
|
|
C Spanner Size Vortx ProTech
Any one know the C spanner size for the standard ProTech shocks on the MNR Vortx? 1.9" or 2.25"?
Better to Burnout than to Fade Away JET METAL ~ AndySparrow ©
|
|
|
adithorp
|
posted on 16/10/14 at 01:44 PM |
|
|
Can't you just measure the spring diameter?
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
Jon Ison
|
posted on 16/10/14 at 01:48 PM |
|
|
I can't answer your question but I just have a "flappy" one that hinges, does both 1.9 & 2.25 with ease.
|
|
sucksqueezebangblow
|
posted on 16/10/14 at 02:07 PM |
|
|
Thanks both,
Couldn't measure it as I'm in London and the car is in York, but got through to Chris at MNR who confirmed it is 1.9"
Thanks again!
Better to Burnout than to Fade Away JET METAL ~ AndySparrow ©
|
|
MikeCapon
|
posted on 17/10/14 at 06:14 AM |
|
|
Watch out. 1.9" is the spring ID not the C spanner size. You'll need a C spanner o suit a spring seat with an OD of 62.5mm.
HTH
Mike
www.shock-factory.co.uk
|
|