Dick Axtell
|
| posted on 4/2/03 at 08:17 PM |
|
|
Wishbone set-up & Castor angle - again!
Hi All,
Last October, there was a lengthy discussion on how various elements of the front suspension are arranged. Here's a very useful website, which also
provides clear and helpful diagrams :-
www.rqriley.com/images/
Check out Figs. 5, 6 & 7.
Work-in-Progress: Changed to Zetec + T9. Still trying!!
|
|
|
|
|
fastenuff
|
| posted on 5/2/03 at 06:39 PM |
|
|
mistery part ?
Well been riding the waves of the net again and had another whipe out on these bits. The upright is an aloy part with cortina dimensions unless i
misread the german that is, but the lower ball joint might be a nice part for someone who can find the partnumbers for it.
see it here
an other subject if the lotus elan has a very simular front suspension setup to the 7 that would mean the same steering rack could be used. Spyder
eng. offer a chasis replacement with new suspension components with a Rover steering rack. Just thinking that of the shelf parts are easier to replace
than modified,
[Edited on 5/2/03 by fastenuff]
Ingmar
|
|
|
