mattandmike
|
 posted on 3/9/07 at 09:14 PM |
|
|
Powder coating near Cambridgeshire!
Our chassis is now ready for powder coating, but local firms can't handle the length of the chassis (3.1m)
The only one that can wants to charge us £350!!!
Anybody know of a good powder coater close (ish) to Cambs that won't rip us off?
|
|
|
|
|
pathfinder
|
 posted on 3/9/07 at 09:42 PM |
|
|
Sandy powdercoating, Eaton Socon, St Neots.
Ask for Greg, he did my chassis, side panels and wishbones for £150 cash
|
|
|
big_wasa
|
| posted on 3/9/07 at 09:43 PM |
|
|
If the above quot inclueds media blasting then that price isnt as bad as it looks.
You will get it done for much less with out good prep but you will regret it when it falls of.
|
|
|
stuart_g
|
| posted on 4/9/07 at 07:58 AM |
|
|
I'm pretty sure there's a powder coaters in Royston.
|
|
|
iank
|
| posted on 4/9/07 at 08:51 AM |
|
|
There is a place in Milton (opposite Tesco) that does stove enamelling. I think I remember reading on their signage that they also do powder
coating. I'll check next time I'm down there and update. Might also be a place up in Waterbeach.
Agree with the above re: blasting. If it isn't blasted it will look good for a short time and then start chipping and when water gets under it
fall off in sheets.
Due to the nature of the coating it's very hard to repair in any way that looks good (except blasting it all off and doing the job again).
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
mattandmike
|
| posted on 4/9/07 at 02:47 PM |
|
|
Hi.
Thanks to all replying. I will look up Sandy Powder coating & give them a try.
Did try the Milton place, really helpful people but they cannot handle the length of the chassis. They suggested a place in Royston who I contacted
but no reply!
|
|
|
rusty nuts
|
| posted on 8/9/07 at 07:57 PM |
|
|
quote:
Originally posted by iank
There is a place in Milton (opposite Tesco) that does stove enamelling. I think I remember reading on their signage that they also do powder
coating. I'll check next time I'm down there and update. Might also be a place up in Waterbeach.
Agree with the above re: blasting. If it isn't blasted it will look good for a short time and then start chipping and when water gets under it
fall off in sheets.
Due to the nature of the coating it's very hard to repair in any way that looks good (except blasting it all off and doing the job again).
That would be Morley Brothers . Have done jobs for me in the past that have always been first class . They also refurbish wheels . Milton Precision
Engineering on the same site also do good work.
|
|
|
bpgoa
|
| posted on 17/9/07 at 05:18 PM |
|
|
J T Finishing Solutions
J T Finishing Solutions's SL1Website
J T Finishing Logo
Unit 3A, Barton Road Trading Estate, Bury St. Edmunds, Suffolk IP32 7BE
Tel: 01284 76725
• Powder Coating Specialists • Spray Painting • One Offs To Batch Work • Blast Cleaning • Metal Finishing Solutions • Industry And General Public
Powder Coating
* Map/Directions to J T Finishing Solutions
* E-mail J T Finishing Solutions's business
* Send J T Finishing Solutions's number to mobile
* Save J T Finishing Solutions to address book
On and On the River flows... We the Undertow
|
|
|
sabre504
|
 posted on 20/9/07 at 03:32 PM |
|
|
coatin
Had mine done in soham behind the pet place blasted and coated 300 squids
and offer the choice of any colour
|
|
|
sabre504
|
| posted on 20/9/07 at 03:34 PM |
|
|
coatin
http://www.gklcoatings.com/products.htm
|
|
|
INDY BIRD
|
| posted on 14/10/07 at 05:44 PM |
|
|
Hi
there is a powder coater in haverhill suffolk s&s finishers do google on it used him for small parts before,
Also a big powder coater on the A13 near barking essex,
Hope this helps
|
|
|
.jpg)
