Richard Quinn
|
| posted on 24/11/07 at 12:40 PM |
|
|
BEC bike hydraulic clutch master cylinder
To those who are using the original bike m/c for the clutch - How are you mounting the m/c and how are you actuating it from the pedal? I have a few
ideas of my own but would like to see if there is a concensus or an option that stands out.
Thanks in advance.
Richard
|
|
|
|
|
pathfinder
|
| posted on 24/11/07 at 12:54 PM |
|
|
I’m going to use a bike rear brake cylinder as it is easier to mount!
|
|
|
tks
|
| posted on 24/11/07 at 01:01 PM |
|
|
yupsz this is generly done....
to operate the clutch only piston diameter is nececary, stroke is important but not deadly...
Tks
The above comments are always meant to be from the above persons perspective.
|
|
|
russbost
|
| posted on 24/11/07 at 01:27 PM |
|
|
I weld a bracket at right angles to the frontplate of the pedal box with 2 holes to bolt into the original m/cyl mounts, cut off the end of the ali
casting on the clutch m/cyl (in my case old ZX10) as it's not required & grind down the end of the car operating pushrod (in my case MR2) to
the size of the bike pushrod - 4mm dia IIRC. Does the job a treat & looks neat when finished. HTH
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
russbost
|
| posted on 24/11/07 at 05:16 PM |
|
|
Just added the pics to my photo archive if you want to see how I did it. HTH
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
