Xtreme Kermit
|
| posted on 19/11/12 at 08:56 PM |
|
|
Halfrauds - What's a cotter pin?
I must be getting old...
Thinking that you get spare bit for bikes in Halfrauds, I went in to get a set of cotter pins for an old bicycle my daughter uses.
Me: Hi, do you have any cotter pins?
Spotty pre-pubescent assistant: What are those then?
Me: They used to hold the pedals on in the seventies...
Spotty pre-pubescent assistant: Oh. We don't keep part for old bikes.
Whats a cotter pin???  . Arse!
|
|
|
|
|
bi22le
|
| posted on 19/11/12 at 09:02 PM |
|
|
Sorry, I dont know what a cotter pin is either. . . .
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
AdrianH
|
| posted on 19/11/12 at 09:04 PM |
|
|
Spilt pin!
Adrian
Why do I have to make the tools to finish the job? More time then money.
|
|
|
big_wasa
|
| posted on 19/11/12 at 09:07 PM |
|
|
horrid things, I never could get them out.
[Edited on 19/11/12 by big_wasa]
|
|
|
coyoteboy
|
| posted on 19/11/12 at 09:10 PM |
|
|
That's not a cotter pin wasa? That's a tapered axle (still exist, though usually square taper).
This is a cotter pin:
|
|
|
mark chandler
|
| posted on 19/11/12 at 09:11 PM |
|
|
I would call a split pin a split pin, a cotter pin is the thing with an angled shaved edge that pins the pedal arms to the crank.
But then I am old, how do they secure pedal arms to cranks these days?
Big_wasa' pic
[Edited on 19/11/12 by mark chandler]
|
|
|
ReMan
|
| posted on 19/11/12 at 09:16 PM |
|
|
quote:
Originally posted by big_wasa
horrid things, I never could get them out.
[Edited on 19/11/12 by big_wasa]
Yep and I used to wear them out being erm "heavy' on my bikes before BMX's were even thought of!
www.plusnine.co.uk
|
|
|
hillbillyracer
|
| posted on 19/11/12 at 09:18 PM |
|
|
Cotter pins are the tapered pins that hold cranks to old bikes & kingpins into axle ends on old vehicles, if they dont go in the first couple of
sharp knocks with a hammer they'll be a right cnut!
A split pin is a split pin.
|
|
|
coyoteboy
|
| posted on 19/11/12 at 09:18 PM |
|
|
Current method:
Cotter pin:
http://en.wikipedia.org/wiki/Cotter_pin
I've apparently always known the US version 
[Edited on 19/11/12 by coyoteboy]
|
|
|
mookaloid
|
| posted on 19/11/12 at 09:21 PM |
|
|
quote:
Originally posted by big_wasa
horrid things, I never could get them out.
[Edited on 19/11/12 by big_wasa]
British Cotter Pin
quote:
Originally posted by coyoteboy
That's not a cotter pin wasa? That's a tapered axle (still exist, though usually square taper).
This is a cotter pin:
American Cotter Pin  - split pin in English
"That thing you're thinking - it wont be that."
|
|
|
big_wasa
|
| posted on 19/11/12 at 09:22 PM |
|
|
Taken from wikipedia, so it must be true !
Cotter pin may refer to:
In U.S. usage:
Split pin, a metal fastener with two tines that are bent during installation used to fasten metal together, like with a staple or rivet
Hairpin cotter pin, more commonly known as an "R-clip"
Bowtie cotter pin, a vibration-proof type of R-clip that is shaped like a bowtie
Circle cotter, a ring-shaped cotter pin
In British usage:
Cotter (pin), in mechanical engineering a pin or wedge passing through a hole to fix parts tightly together
This usage difference is often a cause of confusion when companies of both countries work together.
beaten to it by mook
[Edited on 19/11/12 by big_wasa]
[Edited on 19/11/12 by big_wasa]
|
|
|
adithorp
|
| posted on 19/11/12 at 09:24 PM |
|
|
Wasa's picture IS a cotter pin.
A "split pin"as in the other picture, is actually really called a "split cotter pin" and something entirely different thing.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
stevegough
|
| posted on 19/11/12 at 09:28 PM |
|
|
Big Wasa (and Mark Chandler) are right, Coyoteboy obviously works at Halfrauds 
They are now secured by having a square, tapered bottom bracket shaft, with a matching square tapered hole in the pedal crank, the ends of the shaft
have a fine-pitch thread into which a bolt is screwed to retain the crank, this is recessed into the body of the pedal, then finished off with a
plastic cap.
See pic on the link --->
linky
The exception to this is BMXs which have a one-piece crank.
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|
|
Ninehigh
|
| posted on 19/11/12 at 09:31 PM |
|
|
I was thinking a cotter pin was the one in the back wheel that allowed you to freewheel
|
|
|
Xtreme Kermit
|
| posted on 19/11/12 at 09:34 PM |
|
|
Yep, I'm with wasa on this. Its the taper jobby
Leave this nut on loosely and whack it with a club hammer. If yer lucky it'll come loose.
Looks like I'll have to try a proper bike shop, as I'm guessing the eBay ones will be made of chocolate...
Interesting about the American connection. Never expected that.
|
|
|
adithorp
|
| posted on 19/11/12 at 10:08 PM |
|
|
quote:
Originally posted by Xtreme Kermit
Yep, I'm with wasa on this. Its the taper jobby
Leave this nut on loosely and whack it with a club hammer. If yer lucky it'll come loose.
Looks like I'll have to try a proper bike shop, as I'm guessing the eBay ones will be made of chocolate...
Interesting about the American connection. Never expected that.
The trick to removing is to hit the other end first. Counter-intuitive but it works.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
Canada EH!
|
| posted on 19/11/12 at 10:12 PM |
|
|
From the Colonies, a split pin in North America is called a cotter pin. The metal retainer which holds the axle nut from unwinding and falling off the
spindle closely fallowed by the front wheel.
|
|
|
ChrisL
|
| posted on 19/11/12 at 10:14 PM |
|
|
I was in there out of desperation on sunday after brake bleed nipples for an MX5, 'huh' was my response
|
|
|
austin man
|
| posted on 19/11/12 at 11:07 PM |
|
|
definitely the tapered one a split pin is as it says a pin that splits usaully used through a castleated nut fitted many of these on Raleigh choppers
oh and on the bottom of the Austin a35 Kingpins
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
Andi
|
| posted on 19/11/12 at 11:15 PM |
|
|
I was asked what a Sierra was last year at my local Halfords.
|
|
|
Peteff
|
| posted on 19/11/12 at 11:23 PM |
|
|
A different type of cotter pin used to hold the handbrake cable into the lever on back axles. It was like a nail with a hole drilled in for a split
pin to go through.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
Westy1994
|
| posted on 19/11/12 at 11:27 PM |
|
|
Yes I remember Cotter Pins, I used to stock up on them back in my cycling years, but your story reminded me of another example of stupidity with
todays shop staff. About 15 years ago, when I was Hillclimbing, I took a brand new set of Yoko slicks and some wheels to Kwickfit, I was stood there a
good 20 mins before getting the attention of someone, despite them knowing I was there. After a while I had to go over to a guy after someone wwho had
just walked in got their problem sorted out in seconds, the guy said " I am not putting those tyres on those wheels because they are totally
bald"....... I kid you not they were the words he used.... I said I know they are bald, I paid dam good money for them to be such.... This
confused him somewhat, and went to fetch his boss..... Who apologised and gave me a discount for the wasted time and ignorant staff...
The lad wasn't there a week after that.....
|
|
|
indykid
|
| posted on 20/11/12 at 12:10 AM |
|
|
quote:
Originally posted by ChrisL
I was in there out of desperation on sunday after brake bleed nipples for an MX5, 'huh' was my response
You'll be lucky to find m8x1 bleed nipples even in a good motor factor's. I had to get mine from brakes international.
|
|
|
Ninehigh
|
| posted on 20/11/12 at 07:19 AM |
|
|
quote:
Originally posted by ChrisL
I was in there out of desperation on sunday after brake bleed nipples for an MX5, 'huh' was my response
Probably thought you were some sort of pervert after hearing "break bleed nipple"
|
|
|
liam.mccaffrey
|
| posted on 20/11/12 at 07:36 AM |
|
|
I've had real trouble finding bleed nipples locally. I did manage to find a lorry mechanic who had a big stash though.
Build Blog
Build Photo Album
|
|
|
.jpg)
