mcerd1
|
| posted on 6/1/14 at 11:50 AM |
|
|
WTD: P or D shaped extrusion
I need about 4m of P or D shaped extrusion preferably in anodised aluminium
it needs to be ~ 5 to 10mm tall with a radius to match
I'm really struggling to find anything like this...
any suggestions ?
-
|
|
|
|
|
Charlie_Zetec
|
| posted on 6/1/14 at 01:50 PM |
|
|
Try a company called AALCO - they have branches all over the UK. Can't guarantee anything, but I have dealings with them at work and
they're usually very helpful.
EDIT - they usually deal with trade customers, but can't do any harm to enquire.
Artificial intelligence is no match for natural stupidity!
|
|
|
mcerd1
|
| posted on 6/1/14 at 03:12 PM |
|
|
got there catalogue already (we use them at work) - they don't have any standard profiles that are right 
they'd make it as a custom section if I wanted 10 - 20 tonnes of thi though 
-
|
|
|
kipper
|
| posted on 6/1/14 at 03:24 PM |
|
|
alloy extrusion
Hi ,try googling Eltheringtons of Hull, click on stock holding and then caravan extrusions .
Regards Denis.
Where did that go?
<<<<
|
|
|
loggyboy
|
| posted on 6/1/14 at 03:58 PM |
|
|
http://www.woolies-trim.co.uk/p-1038-half-round-aluminium.aspx
Not ally, and is hollow, but is this any good?
http://www.woolies-trim.co.uk/c-114-hood-bar.aspx
Mistral Motorsport
|
|
|
mcerd1
|
| posted on 8/1/14 at 03:19 PM |
|
|
cheers guys
actually the woolies links are giving me other ideas - I feel a change of plans coming on....
-
|
|
|
