Mikef
|
| posted on 16/8/15 at 07:30 AM |
|
|
POR15 metal ready
I have to paint a couple of patches on my daily, and was thinking of using POR15 metal ready before I used a std spray primer then base coat. Not sure
if this would be compatible with the POR 15. If not any suggestions , the metal is fine just some surface rust.
|
|
|
|
|
Ugg10
|
| posted on 16/8/15 at 07:48 AM |
|
|
I have used the por 15 metalprep product and so long as you follow the instructions and wash off well and leave to dry I have had no problems with
rattle can primer.
---------------------------------------------------------------
1968 Ford Anglia 105e, 1.7 Zetec SE, Mk2 Escort Workd Cup front end, 5 link rear
Build Blog - http://Anglia1968.weebly.com
|
|
|
Mikef
|
| posted on 16/8/15 at 08:22 AM |
|
|
Thanks.
|
|
|
CosKev3
|
| posted on 16/8/15 at 08:40 AM |
|
|
Metal Blast from Rust Bullet is good, not sure how it compares in price to POR15, but Rust Bullet paint is much better than POR15 paint.
|
|
|
wicket
|
| posted on 16/8/15 at 09:09 AM |
|
|
I used metal ready and POR15 paint on my engine and gearbox in 2005. Its as good as new once the surface dirt is removed.
|
|
|
