bikkel
|
| posted on 13/2/05 at 05:19 PM |
|
|
CARBON INTERIOR nearly finished
hi all
finally , almost done....
 
INTERIOR 13-02-2005
 
INTERIOR 13-02-2005
 
INTERIOR 13-02-2005
 
INTERIOR 13-02-2005
more in photoarchive
regards
koen
www.zx12r-indy.tk
www.zx12r-indy.tk
|
|
|
|
|
scutter
|
| posted on 13/2/05 at 05:26 PM |
|
|
Very nice, looks like carbon is the new black.
ATB Dan.
|
|
|
Peteff
|
| posted on 13/2/05 at 06:11 PM |
|
|
Wow
Bling bling
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
Jon Ison
|
| posted on 13/2/05 at 08:22 PM |
|
|
10/10....... very nice, now then think we need to talk carbon in the near futre....
|
|
|
Mave
|
| posted on 13/2/05 at 09:12 PM |
|
|
Hmmmmm, very nice! Where did you get the panels made? And were they expensive?!?!
I think you need my seats Koen!
/HPIM0968_medium.jpg)
|
|
|
bikkel
|
| posted on 14/2/05 at 07:06 PM |
|
|
hi mave
mmm. .... carbon seats ............... :-)
henri helmich (tiger sportscars netherlands ) made the panels
koen
www.zx12r-indy.tk
|
|
|
krlthms
|
| posted on 15/2/05 at 12:18 AM |
|
|
Koen,
Very nice; a couple of ??
How are you attaching the CF panels to the chassis (screw? rivet? bonding?)
Are the floors also CF?
Are any of the CF panels structural (meaning do they add torsional strength)?
Cheers
KT
|
|
|
bikkel
|
| posted on 15/2/05 at 07:35 PM |
|
|
hi
side panels+ tunnelsides+rear panel =
pu- bonded +riveted
panels are much stiffer than 1mm aluminium --> a bit structural i'd say
tunnel top etc. is bolted with a few rivnuts
regards
koen
www.zx12r-indy.tk
|
|
|
chrisf
|
| posted on 18/2/05 at 02:11 PM |
|
|
What thickness, weave, weight was used for the panels??
--Thanks, Chris
|
|
|
bikkel
|
| posted on 18/2/05 at 07:45 PM |
|
|
i think
400 grams /m2
koen
www.zx12r-indy.tk
|
|
|
