mkblade
|
| posted on 3/6/07 at 10:39 PM |
|
|
terminals for savage swithes
is there specail termainals for the above
the closest i could find were the small speaker wire terminals but they still are slightly to big and fall of the switch
can any one recommend the correct type
thanks simon
|
|
|
|
|
bigrich
|
| posted on 3/6/07 at 10:46 PM |
|
|
got my terminals from mac#1 and some inslated covers aswell. seem very secure
.JPG)
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
|
nitram38
|
| posted on 4/6/07 at 03:32 AM |
|
|
You can solder them, that is what the hole is for. If you ever change the switch, all you have to do is unclip the front etc.
|
|
|
RazMan
|
| posted on 4/6/07 at 06:01 AM |
|
|
The speaker terminals do fit quite well if you just tweak them up with a small pair of pliers first.
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
esn163
|
| posted on 4/6/07 at 07:20 AM |
|
|
Hi
we found the terminals on vehicle wiring products.
IIRC I think the 2.8mm ones are the ones that fit but you might want to measure the pins to check.
pre insulated
non insulated
HTH
Ed
Indy Build Photos
** Build pages **
Photo Bucket Pics
|
|
|
Avoneer
|
| posted on 4/6/07 at 11:04 AM |
|
|
Normal small red cased crimps fit fine. Think you can buy them at Halfords.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
%20(WinCE).JPG)
