Does anyone have experience of these people? http://www.westgatecomposites.com/index.php If so, how did you get on?

Nope! What do you need doing?

No personally but he appeared to have done a fantastic job on Dickie B's Fury….and makes headlight covers for Furys, Stylus etc….not heard anything bad…

http://www.locostbuilders.co.uk/viewthread.php?tid=158457

[Edited on 18/11/13 by stevebubs]

Andy is a really helpful chap, he made the fury light covers and I've bought several pars from him.

As above really nice guy to deal with - bought a set of classic fury light covers.

Thanks for your comments, seems like a helpful guy.

No damage to mine but while I was quite proud of the removable bonnet bulge I made, it detracts from JP's pretty lines. I would like to get a better looking one done but am not sure I can face the aggro of more buck/mould/moulding production again! I shall also need some sort of rear wheel arch spats/flaring too. I shall have to see what the cost is.

I had a good read of your build in the jpsc mag (as you know)...and wondered if there is any premade carbon ones that would do the job?....Maybe like this:

Click

I'm considering somthing similar (but smaller) just to act as a cold air feed to the induction.

Paul that is certainly a thought. I am just mulling these issues over at the moment as have been trying to cure an engine oil leak and the box is away for a rebuild as synchro has gone on third. Then there is decorating before Xmas, so I am told, so it will be the New Year before we get onto the other winter jobs.