tapkutez
|
posted on 6/8/10 at 01:48 PM |
|
|
BEC->clutch->springs
Hello, wanted to know will my clutch slip with original springs? ( engine: honda cbr900 fireblade 893cc, sc28).
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
|
mistergrumpy
|
posted on 6/8/10 at 04:26 PM |
|
|
I did answer here but you've started this same thread in the MK section and already have your answer there.
What's the point in repeating yourself?
[Edited on 6/8/10 by mistergrumpy]
|
|
LBMEFM
|
posted on 6/8/10 at 06:28 PM |
|
|
Bit confused who's answering what but hey ho for what it's worth I have fitted MT99 barnett heavy duty springs to mine as Andy suggests
and have had no problems. So thats why they call you mistergrumpy!
|
|
mark chandler
|
posted on 6/8/10 at 08:08 PM |
|
|
I put some heavy duty ones in mine, good for 180 bhp, mine slipped a little probally because of the 200ml overfill in oil.
Only costs !15 and takes 20 minutes to do.
Regards Mark
|
|