Irony
|
posted on 16/8/16 at 12:04 PM |
|
|
Nose cone vents.
I am on a mission to reduce under bonnet temps and I have looked through every post on here I can find. Most people seem to cut holes and hope for
the best but aerodynamics are a slippery beast and you might make things worse.
Westfield do a V8 nosecone and can anyone explain how this works? Apparently the lip in front of the vent changes air pressure and helps draw air
out. Can anyone explain????
|
|
|
prawnabie
|
posted on 16/8/16 at 12:12 PM |
|
|
That's a ducted nose - the coolant rad is fixed to the nose cone and the hot air is ducted out of that hole and not into the engine bay.
|
|
CosKev3
|
posted on 16/8/16 at 12:15 PM |
|
|
As above,any air that passes through the rad goes out of that top hole rather than into bay.
Looks a good idea,do they work?
|
|
Smoking Frog
|
posted on 16/8/16 at 12:27 PM |
|
|
If you haven't already seen it, scutter has a good solution here :-
http://www.locostbuilders.co.uk/forum/4/viewthread.php?tid=188555#pid1586573
|
|
ch1ef
|
posted on 18/8/16 at 08:32 PM |
|
|
I think really what you asking is how does a lip in front of a vent help?
Well as the air hits the lip, it is directed upwards and thus making a lower pressure area behind and therefor pull air out from the vent
|
|