Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: wiring loom headaches
trevor goodman

posted on 26/2/06 at 11:31 AM Reply With Quote
wiring loom headaches

just cant make up my mind what way to route the loom through to the engine bay I'm planning to have the fuse box inside the car but I can't decide to route through the tunnel or the scuttle i would love some suggestions and pictures thank lads
View User's Profile View All Posts By User U2U Member
Ian D

posted on 26/2/06 at 12:35 PM Reply With Quote
Im planning to bring mine into thre car up throught the tunnel. On the basis that water runs / tracts down hill. As oposed to coming through the scuttle.

Ian D

View User's Profile E-Mail User View All Posts By User U2U Member
Gazza

posted on 26/2/06 at 08:41 PM Reply With Quote
Up the tunnel!

Brought mine up through the tunnel - only have one hole in the scuttle for the OMEX wiring- all looks nice and neat (honest).

Cabling in the engine bay is all clipped to the underside the top chassis rails to hide it from view as much as possible.

Wiring





Just a bag o' rusty spanners

View User's Profile Visit User's Homepage View All Posts By User U2U Member
wilkingj

posted on 26/2/06 at 09:01 PM Reply With Quote
Up my Tunnel too..
Although I did put my fuse box in the engine bay.. Too much messing about under the dash at my age is not good for my back
Tip: I dismantled the fusebox to get it through the hole in the bulkhead, as the hole would be far to big to hide behind the fusebox. Make a Drawing of the wiring in the fusebox before you do this.

Everthing was finally wrapped in split convoluted tube before being fixed with clips to the bulkhead / chassis etc

I also made up a plate with some rivnuts in it for the relays. Tip: Mark the holes, with the Relays FITTED to the holders. I didnt

Look Down My Tunnel!
Look Down My Tunnel!

Rear of Engine Bay
Rear of Engine Bay

Relay Plate behind Dash
Relay Plate behind Dash






1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.

Best Regards
Geoff
http://www.v8viento.co.uk

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Paul (Notts)

posted on 27/2/06 at 08:19 PM Reply With Quote
I ran the engine loom through the scuttle and the lighting loom via the tunnel - dont Know why just seem to fit with my loom.. pic shows fuse bokes and relays wired throught scuttle and engine loom through scuttle.

[Edited on 27/2/06 by Paul (Notts)] Rescued attachment oct 019.jpg
Rescued attachment oct 019.jpg

View User's Profile E-Mail User View All Posts By User U2U Member
Paul (Notts)

posted on 27/2/06 at 08:21 PM Reply With Quote
another pic Rescued attachment oct 022.jpg
Rescued attachment oct 022.jpg

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.