Dillinger1977
|
| posted on 14/6/05 at 12:09 PM |
|
|
wtb: R1 or blade
while I was hoping to put this off until a bit later, im now looking for a suitable engine for the car, im after an R1 of any flavour (carb/EFI, not
fussy)
ebay is blank, and have mailed Colibriman who will hopefully give me a shout if he gets more in.
in the meantime, anyone know of any other good sources, or seen some recently?
only got about 1200-1300 for engine including necessary mods...
will consider other similar spec engines but i'd want it to be as easy to install!. (no dry sumps!)
cheers,
Rog
[Edited on 25/6/05 by Dillinger1977]
-Rog
|
|
|
|
|
colibriman
|
| posted on 14/6/05 at 12:19 PM |
|
|
another for you guys to consider is the Fazer1000 engine..it fits better under a bonnet too as the carbs and airbox are different from the R1
setup.
Torque is developed lower in the rev range..still 143bhp.
Athoirs (Andy) has one.....
and I'm selling one...
need a bike engine? - www.colibriman.com
SVA ready Mk Indyblade possibly for sale.....if the offers good...!
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
JoelP
|
| posted on 14/6/05 at 06:35 PM |
|
|
me too!
Beware! Bourettes is binfectious.
|
|
|
colibriman
|
| posted on 14/6/05 at 06:42 PM |
|
|
ohh...you sly wee devil Joel..... nice choice !
need a bike engine? - www.colibriman.com
SVA ready Mk Indyblade possibly for sale.....if the offers good...!
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
JoelP
|
| posted on 14/6/05 at 07:22 PM |
|
|
lol! i keep getting tempted to sell the zx9s, but i still have a dream
Beware! Bourettes is binfectious.
|
|
|
colibriman
|
| posted on 14/6/05 at 07:27 PM |
|
|
gonna share it?
need a bike engine? - www.colibriman.com
SVA ready Mk Indyblade possibly for sale.....if the offers good...!
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
athoirs
|
| posted on 14/6/05 at 08:58 PM |
|
|
top engine.. just about the same power output as a R1..same exhaust manifold... same mounts at the rear and it fits under the lowest hood with airbox
oh and the clutch is better as well.
 
Rescued attachment car insure 006.jpg
|
|
|
Dillinger1977
|
| posted on 25/6/05 at 08:51 AM |
|
|
just a bump as im still looking.
The fazer would do me fine but the mounts are different to an r1 and I cant weld. - i'd have to get a mouting cradle off Marc at MNR for an
engine hes already fitted and he hasnt done a fazer. 
so im still looking for any R1, and also widening the search to include recent Fireblade's if anyone has any!
cheers!
-Rog
|
|
|
kipper
|
| posted on 25/6/05 at 02:42 PM |
|
|
Rog you have u2u. Regards Kipper
|
|
|
Hellfire
|
| posted on 25/6/05 at 04:28 PM |
|
|
A good source for various bike engines. Try this
Engines
Last time I looked there were stacks of R1's. Just click on classifieds and choose engine. 
|
|
|
andrew.carwithen
|
| posted on 26/6/05 at 05:26 PM |
|
|
For all things Fireblade and installing them in cars, then contact Andy Bates at AB Performance. Tel. 01284 703101
He's an ex British sidecar champion and knows everything there is to know about the 'blade engine in its various guises.
He sells complete packages for BEC installations including uprated Barnet clutches, baffle plates, looms, gearchange mechanisms etc.
If you do ring him, give yourself a good 45 mins free time as it'll be one of the most informative conversations you'll ever have!
Andy.
|
|
|
Dillinger1977
|
| posted on 26/6/05 at 06:58 PM |
|
|
odd that, i sent that fella an email on friday after seeing some of his ebay auctions! 
thanks for the advice chaps!
-Rog
|
|
|
