Danozeman
|
| posted on 29/9/05 at 09:07 PM |
|
|
TPS for bike carbs.
Does anyone have a Throttle position sensor from a set of bike carbs??
My carbs have no sensor on and i would like to make one fit for use with megajolt.
Failing that a set of carbs with one on.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
|
|
paulf
|
| posted on 29/9/05 at 09:13 PM |
|
|
Your best bet is to get a TPS from a zetec car such as a mondeo or escort. It would just be a matter of making an adaptor for the spindle and maybe a
mounting bracket.Alternatively RS sell a suitable Pot for about £17 .
Paul.
|
|
|
MikeR
|
| posted on 30/9/05 at 07:43 AM |
|
|
I was looking at doing this till i realised that at 34 quid the honda one is more expensive but ..... guarenteed to work and how much is a couple of
hours of your time worth?
(still haven't bought it mind you - will prob get one from a breakers cause i'm mean).
|
|
|
paulf
|
| posted on 30/9/05 at 10:20 AM |
|
|
My throttle bodys only cost that and the sensor was sort of free from scrappy, so happy to find an excuse to spend another couple of hours in
workshop.
I have also heard some bike sensors are not fully compatible , the ford one is a linear 5k pot.
Paul.
Paul
quote:
Originally posted by MikeR
I was looking at doing this till i realised that at 34 quid the honda one is more expensive but ..... guarenteed to work and how much is a couple of
hours of your time worth?
(still haven't bought it mind you - will prob get one from a breakers cause i'm mean).
|
|
|
Danozeman
|
| posted on 30/9/05 at 12:45 PM |
|
|
Id better get doon the scrappie and find an old zetec one then.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
.jpg)
