bi22le
|
 posted on 4/3/12 at 03:19 PM |
|
|
Do your tools also talk to you?!
I have just been using a Dremel to make some ends for my new trumpet \ velicity stacks. So for the last few hours I have had the noise in my ear hole
and I am sure the Dremel was repeating the words:
"I know" In a simpathetic way
and
"all right" in a knowing or comforting way.
Over and over again as I was grinding with it.
I have had angle grinders simply go "AAAGGGGGGGGGGGGGHHHHHHHHHHHH" as your cutting too
So what do your power tools say to you?!?!
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
|
|
CRAIGR
|
| posted on 4/3/12 at 03:29 PM |
|
|
You've not taken your medication have you Bizzle 
|
|
|
lewis
|
| posted on 4/3/12 at 03:29 PM |
|
|
You know your not suppost to use power tools while drinking don't you.
I am a driving god!..........sort of
|
|
|
Angel Acevedo
|
| posted on 4/3/12 at 04:16 PM |
|
|
STOP USING TOOL-DOSE!!!
It is highly ADDICTIVE!!!
Beware of what you wish.. for it may come true....
|
|
|
scudderfish
|
| posted on 4/3/12 at 04:19 PM |
|
|
This guy did
|
|
|
bonzoronnie
|
| posted on 4/3/12 at 04:20 PM |
|
|
Never heard my tools talking to me but the little buggers spend most of their life hiding from me
Take today for instance, I broke my T40 torx bit & spent over an hour looking for one of my old ones. 
During that search, found loads of things that I looked for in the past & never found but never found my spare torx bit
|
|
|
lotusmadandy
|
| posted on 4/3/12 at 04:46 PM |
|
|
The gear i already have never says a word.
Its the tools i look at in halfrauds and the like,
that always say 'buy me please'
Andy
|
|
|
D Beddows
|
| posted on 4/3/12 at 05:24 PM |
|
|
Steady on, you're one step away from this bloke:
my little lad loves him and I have to say he never seems to do any of the work - the tools do - so perhaps it's the way forward........ or
you could just start taking the medication again!
|
|
|
omega 24 v6
|
| posted on 4/3/12 at 05:30 PM |
|
|
Handi Mani. My grandson likes him too.
If it looks wrong it probably is wrong.
|
|
|
Benzine
|
| posted on 4/3/12 at 05:30 PM |
|
|
My drill gives me detailed instructions on how to wire and map megasquirt, but it's all in mandarin and under 20 Hz
|
|
|
blakep82
|
| posted on 4/3/12 at 05:40 PM |
|
|
all of mine taunt me, tell me i'm shite....
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Peteff
|
| posted on 4/3/12 at 08:34 PM |
|
|
I have a ball pein hammer that tells me to kill people 
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
Mr G
|
| posted on 4/3/12 at 09:38 PM |
|
|
Normal is getting dressed in clothes that you buy for work and driving through traffic in a
car that you are still paying for - in order to get to the job you need to pay for the clothes
and the car, and the house you leave vacant all day so you can afford to live in it.
|
|
|
