carlknight1982
|
| posted on 19/4/13 at 03:45 PM |
|
|
Metal trim
I have a ugly hole in my bonnet where my exhaust exits, I'm looking to get a piece of metal cut to shape and
Either polished or chrome looking like coated
Anyone know of a place u can get the metal
Cut and plated?
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
|
|
Myke 2463
|
| posted on 19/4/13 at 04:35 PM |
|
|
Hi Carl.
Laser or waterjet cut stainless, try andyw7de on here.
Be Lucky Mike.
|
|
|
renetom
|
| posted on 19/4/13 at 05:14 PM |
|
|
Hi
Made our own
using 3or4mm aly sheet
Jig saw & band saw . very fine wet & dry, scrub pads
then buffing wheel with jewelers rouge to a mirror finish
Stainless pan head screws, job done.
 
exhaust trim
|
|
|
Barkalarr
|
| posted on 19/4/13 at 07:49 PM |
|
|
My mate made mine for me - I just gave him a piece of wood which was cut to shape of the hole and he knocked it up for me.
It's polished aluminium, then silkofixed it to the fibreglass.
Send over a wooden template and ill get him to make you one in exchange for some beer tokens.
Image is in my archive
|
|
|
