Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: squealing alternator
emsfactory

posted on 8/1/06 at 01:24 AM Reply With Quote
squealing alternator

OK. I have an awfull kia mentor. Long story but I have ended up with it.
Long list of MOT fails but most are done. I think its been in the sea.

Thing is the alternator squeals when its connected. I mean when the wires are connected not the belt. when I unplug the alternator there is no noise.
Any ideas?

Also if anyone is looking for a shi...uperb kia mentor get in touch.

View User's Profile E-Mail User View All Posts By User U2U Member
johnemms

posted on 8/1/06 at 01:39 AM Reply With Quote
silly question .. but have you tightend the belt up to see if it goes away? I mean unpluged means no load on the belt cause when it generates curent it puts a load on the pully... no conection=no load=no squeal....

just my thought..

View User's Profile E-Mail User View All Posts By User U2U Member
gazza285

posted on 8/1/06 at 01:46 AM Reply With Quote
Now there's a novel idea.





DO NOT PUT ON KNOB OR BOLLOCKS!

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Genesis

posted on 8/1/06 at 02:06 AM Reply With Quote
Get a new belt - easiest way, you know it is! You'll end up doing that in the end, probably after the one that is squealing right now snaps and leaves you in the lurch. It makes perfect sense whilst you'e working on the belt to renew it doesn't it?

Oh - did I say replace the belt?





Going fishin'

View User's Profile Visit User's Homepage View All Posts By User U2U Member
johnemms

posted on 8/1/06 at 02:20 AM Reply With Quote
has anyone looked at he time 2.30 in the dam morning.... mtv and kit cars!!!
View User's Profile E-Mail User View All Posts By User U2U Member
gazza285

posted on 8/1/06 at 02:27 AM Reply With Quote
I know, I though about an early night around 10, what am I still doing up?





DO NOT PUT ON KNOB OR BOLLOCKS!

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
UncleFista

posted on 8/1/06 at 03:35 AM Reply With Quote
Squirt the belt with a bit of water from a spray bottle, if the squeak goes, it's the belt slipping.





Tony Bond / UncleFista

Love is like a snowmobile, speeding across the frozen tundra.
Which suddenly flips, pinning you underneath.
At night the ice-weasels come...

View User's Profile Visit User's Homepage View All Posts By User U2U Member
907

posted on 8/1/06 at 07:49 AM Reply With Quote
I might be wrong on this but doesn't running an alternator without it
being hooked up to a battery blow the diodes inside it?

I know next to nothing about electrics so I hope I'm wrong,
but for some reason I'm on my second alternator.

Paul G






View User's Profile View All Posts By User U2U Member
Danozeman

posted on 8/1/06 at 09:45 AM Reply With Quote
It can do if run for ages like it.

Squirt the belt with WD40 or water. If it goes its the belt.

AS said above unpluging it will only remove the drag on the belt so even a slack belt wont squeal. The belts probably gone hard.





Dan

Built the purple peril!! Let the modifications begin!!

http://www.eastangliankitcars.co.uk

View User's Profile View All Posts By User U2U Member
Peteff

posted on 8/1/06 at 09:47 AM Reply With Quote
Under load it will squeal. Tighten the belt till there's absolutely no play in it anywhere then try it, not like the old dynamo.





yours, Pete

I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.

View User's Profile View All Posts By User U2U Member
theconrodkid

posted on 8/1/06 at 09:48 AM Reply With Quote
running an alternator un-plugged will kill it,
if the belt is ok and tight enough,check the charging rate,if the reg has gone and its charging flat out the belt wil slip,the battery boil,the alternator explode and mankind shall cease to exist as we know it





who cares who wins
pass the pork pies

View User's Profile E-Mail User View All Posts By User U2U Member
emsfactory

posted on 8/1/06 at 11:36 AM Reply With Quote
I have put in another alternator and the squeal is still there, its had a new belt has been degreased, along with the pulley and has been tightend up and it still squeals?
I'm stuck.
If the car would explode when running with with the alternator unplugged maybe I'll just do that.
Could be fun.

View User's Profile E-Mail User View All Posts By User U2U Member
MkIndy7

posted on 8/1/06 at 12:25 PM Reply With Quote
Might sound daft but is it the water pump bearings or any other pulleys that the belt comes into contact with, and just happens to sound like its the alternator?
View User's Profile E-Mail User View All Posts By User U2U Member
emsfactory

posted on 8/1/06 at 01:43 PM Reply With Quote
The water pump was changed yes. Would that be right that when the alternator is connected the water pump could cause the squeal?
View User's Profile E-Mail User View All Posts By User U2U Member
02GF74

posted on 9/1/06 at 11:22 AM Reply With Quote
quote:
Originally posted by MkIndy7
Might sound daft but is it the water pump bearings or any other pulleys that the belt comes into contact with, and just happens to sound like its the alternator?


This is sounding like a pig to find!!!

no daft, but logical conclusion. Get a mechanics stethoscope or a long cardboard tube placed to ear to identify source of squealing.

Unless you have 2 bad alternators, I would guess the source is elsewhere.

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.