Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Weld-On Chassis VIN plates.
Slinky

posted on 15/5/17 at 02:32 PM Reply With Quote
Weld-On Chassis VIN plates.

Hi guys.
Just wondering if any of you had any trouble getting a chassis stamp done or IVA issues relating to this?
It might be of interest to know that the company (Bespoke Vehicle Developments) who supplied my body and chassis have a machine that stamps chassis numbers directly on to a steel plate for the builder to weld on. On their website, it states they are IVA approved as long as they are welded all the way around and not spot welded. Has anyone had any problems with a spot welded plate in the past? I know most chassis are built from 2mm box and that can be a bitch to stamp without distorting it. My chassis came with the number already welded on, so I wont have the problem of stamping my own. I looked up their costs on their website and sounds very reasonable to me for a professional look. Slinky.

View User's Profile E-Mail User View All Posts By User U2U Member
nick205

posted on 15/5/17 at 03:15 PM Reply With Quote
For my MK Indy I stamped the details on the box section OK then gave it a light coat of paint. Worked fine for SVA as it was back then.
View User's Profile View All Posts By User U2U Member
myke pocock

posted on 15/5/17 at 03:30 PM Reply With Quote
For SVA I used a Dremmel with an engraving bit. Best to write it on with something that stands out first (paint pen?) and then do it. Clamp a bit of wood, angle metal or something else to the chassis member to rest your hand on when doing it though.
View User's Profile E-Mail User View All Posts By User U2U Member
big-vee-twin

posted on 15/5/17 at 06:23 PM Reply With Quote
I used a Dremmel to engrave the chassis passed IVA no issues



[img] Chassis number
Chassis number
[/img]





Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016

http://www.triangleltd.com

View User's Profile View All Posts By User U2U Member
Irony

posted on 15/5/17 at 06:32 PM Reply With Quote
quote:
Originally posted by big-vee-twin
I used a Dremmel to engrave the chassis passed IVA no issues



[img] Chassis number
Chassis number
[/img]




What this gentlemen said.

View User's Profile View All Posts By User U2U Member
christim

posted on 15/5/17 at 09:07 PM Reply With Quote
+1 for Dremel with stencil kit





My Build Thread

View User's Profile View All Posts By User U2U Member
theduck

posted on 15/5/17 at 09:11 PM Reply With Quote
stamped steel plate welded all the way round is fine.
View User's Profile View All Posts By User U2U Member
garyt

posted on 16/5/17 at 05:51 PM Reply With Quote
Stamped plated welded all the way round was fine for iva last year
Note to all do it before the engine is in and the sides are on .... guess who didn't





remember we are not mad just creatively insane !!!!!

View User's Profile View All Posts By User U2U Member
Slinky

posted on 17/5/17 at 02:56 PM Reply With Quote
VIN stamping

This shows what BEV do.
http://www.595s.co.uk/weld-on-v-i-n-services

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.