whitestu
|
| posted on 2/11/08 at 09:12 PM |
|
|
Throttle Body Size for 2.0 Zetec
Are 36mm bodies too small or just about right for a 2.0 Blacktop in standard tune?
Thanks
Stu
|
|
|
|
|
clairetoo
|
| posted on 2/11/08 at 09:22 PM |
|
|
36mm sound's about right to me 
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
paulf
|
| posted on 2/11/08 at 09:34 PM |
|
|
Ive got 38mm gsxr 600s on mine and it seems to go ok, I am also running with speed density mapping with good results rather than having to use Alpha N
like some do.
Paul.
|
|
|
whitestu
|
| posted on 3/11/08 at 10:17 AM |
|
|
Thanks - I was looking at using some Triumph speed four bodies like these
 
bodies
respaced to fit a modified plastic 2.0 Blacktop manifold and fuel rail / injectors.
Stu
[Edited on 3/11/08 by whitestu]
[Edited on 3/11/08 by whitestu]
|
|
|
grazzledazzle
|
| posted on 3/11/08 at 11:23 AM |
|
|
I used jenvey 40s on my blacktop 2ltr. Gave better low down torque than 45's but sacrificed a bit on top end.
|
|
|
.jpg)
