chrisg
|
posted on 26/1/09 at 08:36 PM |
|
|
Aluminium tube
Hi,
I'm looking for 2 meters of 1/2 inch x 10 gauge aluminium tube, any ideas?
Cheers
Chris
Note to all: I really don't know when to leave well alone. I tried to get clever with the mods, then when they gave me a lifeline to see the
error of my ways, I tried to incite more trouble via u2u. So now I'm banned, never to return again. They should have done it years ago!
|
|
|
coozer
|
posted on 26/1/09 at 08:48 PM |
|
|
Tried B&Q? They have 10mm but not sure of the gauge.
I'm using it on the bypass on my zetec.
1972 V8 Jago
1980 Z750
|
|
Hugh Paterson
|
posted on 26/1/09 at 08:51 PM |
|
|
Ali supplies
Hi Chris.
Do a google for Richard Austin Alloys, Nationwide distribution, bound to be one near u, Their Glasgow outlet is the Size of Wembly, suspect the
Midlands shed will be bigger. If u find one near u ask to have a decko at their offcut bin, they sell it off, a great source for bits for yer lathe
and mill, Metal supermarkets get a lot of their steel and ali from roll ends from them. then bump the price up???
Shug
|
|
bob
|
posted on 26/1/09 at 09:17 PM |
|
|
1/2" ali tube 10swg
Plenty to have a look at on the bay chris.
tube
link
|
|
chrisg
|
posted on 26/1/09 at 09:29 PM |
|
|
Thanks chaps!
Chris
Note to all: I really don't know when to leave well alone. I tried to get clever with the mods, then when they gave me a lifeline to see the
error of my ways, I tried to incite more trouble via u2u. So now I'm banned, never to return again. They should have done it years ago!
|
|
Volvorsport
|
posted on 26/1/09 at 10:11 PM |
|
|
ASC in lincoln if you fancy a trip .
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|