Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: finally got it out for a spin...
phil4521

posted on 13/2/11 at 03:00 PM Reply With Quote
finally got it out for a spin...

Take a look at last.

http://www.youtube.com/watch?v=IhFVLN5HNog

Finished it Nov- so got a chance to give at a good blat yesterday- still shaking it down- engine still tight- it hissed down just as I was turning for home- so I know it works in the wet! A few things to fix- like the tacho which seems to now be all over the place- any ideas?

Phil

View User's Profile View All Posts By User U2U Member
koiking125

posted on 13/2/11 at 05:39 PM Reply With Quote
Well done, looks like a nice job..





MK Owners Club Member (Frosty) No.1159

View User's Profile View All Posts By User U2U Member
Paul (Notts)

posted on 13/2/11 at 06:06 PM Reply With Quote


Hope to get out again in mine soon...

Paul






View User's Profile E-Mail User View All Posts By User U2U Member
rusty nuts

posted on 13/2/11 at 06:41 PM Reply With Quote
Can't help with the tacho but give the column switches a squirt of contact cleaner or at least WD40 , they don't like getting wet
View User's Profile View All Posts By User U2U Member
wilkingj

posted on 13/2/11 at 11:35 PM Reply With Quote
Agree with Rusty, water drips down the hazard button and gets into the switches. This then gave me a weird fault and flattened the battery several times before I tracked it down.
The Tacho problem could be electrical noise, or fluctuating supply voltage, or a poor earth.
Check the earthing to the dashboard is good first.
ie metal to metal contact on the chassis. ie scrape off the paint on any areas of chassis where you are bolting earth terminals / ring tags to.
Dont forget to give them a bit of grease / vasseline / petroleum jelly to stop them rusting up and causing another fault later on.

Faults from poor earthing are difficult to find. Take it from me!!
You do have a good thick earth between the chassis and the engine dont you?

Looks good... next time take the vid cam with you!
Nice wheels.... Pro Race 1.2's?? Good choice






1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.

Best Regards
Geoff
http://www.v8viento.co.uk

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
stevegough

posted on 23/2/11 at 08:31 PM Reply With Quote
Like the 'Ebay' reg!





Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.