Micael
|
| posted on 4/6/08 at 08:21 PM |
|
|
Zetec ARP Conrod bolts
Does anyone know what type of socket to use with these?
A 10 mm 12-point socket is too large and a 9 mm is too small.
I suspect that it is some kind of imperial size.
Micael Moose Åman
Petrolhead and all around nice guy
"Don't leave the duck there. It's totally irresponsible. Put it on the swing, it'll have much more fun." //Sleep Talkin Man Dec 23
2009
|
|
|
|
|
Stu16v
|
| posted on 4/6/08 at 08:28 PM |
|
|
Sounds like 3/8 unf will do the trick. Probably is a unf size as they are American based...
Dont just build it.....make it!
|
|
|
Micael
|
| posted on 4/6/08 at 08:35 PM |
|
|
Thanks,
Will try that
Micael Moose Åman
Petrolhead and all around nice guy
"Don't leave the duck there. It's totally irresponsible. Put it on the swing, it'll have much more fun." //Sleep Talkin Man Dec 23
2009
|
|
|
Micael
|
| posted on 5/6/08 at 05:50 PM |
|
|
It was 3/8" 
The bolts are in place
Micael Moose Åman
Petrolhead and all around nice guy
"Don't leave the duck there. It's totally irresponsible. Put it on the swing, it'll have much more fun." //Sleep Talkin Man Dec 23
2009
|
|
|
fastavatar.jpg){kind=avatar}
