Cortina Mk1 1500GT - Valve Stem Size

Not logged in [Login - Register]

LocostBuilders » Forum » Engine & Transmission » Cortina Mk1 1500GT - Valve Stem Size

Power Tools at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

perksy

Contributor

Posts 2259
Registered 12/4/05
Location Shropshire
Member Is Offline

Building: Lotus Twin Cam Engine

posted on 28/12/23 at 07:50 PM

Cortina Mk1 1500GT - Valve Stem Size

Hi All

Right the Turkey has been eaten, so its back in the garage

I'm in the process of rebuilding a cylinderhead from a 1966 Mk1 Ford Cortina (Pre Crossflow) 1500 GT engine

My handbook doesn't give the valve stem size and its tolerance for both the inlet and exhaust valves

Don't suppose by any chance anyone has that info ?

Thanks

Mike Wood

Contributor

Posts 353
Registered 4/12/10
Location SW Scotland
Member Is Offline

Photo Archive Go!

Building: collecting bits for hillclimb Locost project

posted on 28/12/23 at 08:45 PM

Happy seasonal spanner twirling!

Might be worth posting this question on Turbo-sport forum (see thread: http://www.turbosport.co.uk/showthread.php?t=1250990) and Retrorides forum too. See also: https://www.buysellcortina.co.uk/forums/index.php?/topic/53312-1500gt-valve-sizes/

Any useful info here: https://www.classicfordspares.co.uk/categories/classic-ford-spares-engine-camshaft-and-valves?vehicle=cortina-mark-1-113e-118e-rhd-114e-119e-lhd />
Is this for a Cortina, Locost or some other interesting vehicle?

Cheers
Mike

[Edited on 28/12/23 by Mike Wood]

[Edited on 28/12/23 by Mike Wood]

LocostBuilders » Forum » Engine & Transmission » Cortina Mk1 1500GT - Valve Stem Size

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.