macspeedy
|
| posted on 23/6/03 at 07:06 PM |
|
|
pinto plumbing
I am in the process of trial fitting my pinto engine and want to make sure i have connected the pumbing correctly, start with the thermostat housing
this goes to the top of the rad, the bottom of the rad goes to the water pump, the extra feed from the water pump goes to my sierra heater matrix,
which goes to my inlet manifold ( twin 45 webers 3 inch manifold ) into cylider head? have I got that right? have i missed anything?
|
|
|
|
|
chrisg
|
| posted on 23/6/03 at 07:34 PM |
|
|
Just had a look, thats how mine goes, I have a mini heater tho.
Either were both right or both wrong!
No problems so far.
Cheers
Chris
Note to all: I really don't know when to leave well alone. I tried to get clever with the mods, then when they gave me a lifeline to see the
error of my ways, I tried to incite more trouble via u2u. So now I'm banned, never to return again. They should have done it years ago!
|
|
|
