dan8400
|
| posted on 20/9/15 at 07:41 PM |
|
|
Tiger zetec fan belt?
Hi everyone
Went out for a (very short) blast in the tiger tonight. Battery light came on. I stopped to check it out an there was no fan belt. Luckily I was only
a mile from home so just took it steady. Not ideal but I got home.
Anyway, does anyone happen to know the part number or length of the tiger zetec fan / accessory belt. I have 1.8 zetec with their alternator bracket
and pulley. So it'll be their standard belt size.
Thanks
Dan.
Hey - That's Journey!!!
|
|
|
|
|
Slater
|
| posted on 20/9/15 at 08:20 PM |
|
|
I have the same zetec but with CVH alternator, I was told to get some string, put it round the pulleys and measure the length, then visit the local
motor factors and ask for :
5 PK 940 altemator belt
the 940 was the belt length in mm in my case.
the 5 is the number of ribs across the width.
So you just need to ask for 5 PK xxx to suit your string length.
Why do they call Port Harcourt "The Garden City"?...... Becauase they can't spell Stramash.
|
|
|
dan8400
|
| posted on 20/9/15 at 08:32 PM |
|
|
I have a Lucas LRA101 alternator. I think that is the CVH one?
Thanks
Dan
Hey - That's Journey!!!
|
|
|
nickm
|
| posted on 21/9/15 at 07:22 PM |
|
|
Hi Dan
Think you will have to measure as already explained, as that alternator is not from that engine, well it wasnt on my Tiger Cat when i had one.
I would adjust the bracket that the alternator sits in to the mid point to give some allowance to your guestimate/measure or set to the shortest
tightest so it can be tightened up but not loosened off if your measuring is accurate.
Hope this helps
Nick M
Think i saw you out on 6 mile straight the other Friday afternoon.
|
|
|
dan8400
|
| posted on 21/9/15 at 08:04 PM |
|
|
Thanks for tip Nick.
I wasn't out in the Tiger on Friday. Must be another kit flying around on our terrible roads lol.
Thanks
Dan
Hey - That's Journey!!!
|
|
|
dan8400
|
| posted on 22/9/15 at 03:52 PM |
|
|
Turned out to be an 5pk890
Thanks
Dan
Hey - That's Journey!!!
|
|
|
