Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Neil Dunne F2 Brisca Zetec sump, anyone used one?
Regan_M

posted on 15/12/18 at 04:50 PM Reply With Quote
Neil Dunne F2 Brisca Zetec sump, anyone used one?

Hi Guys,

I am looking at one of these as an alternative to the usual options of Raceline , Dunnell sumps mainly for cost. I will be using on track so needs to be suitable for this kind of application.

Anyone have any experience? what are your thoughts?

https://www.tmrsupplies.co.uk/products/brisca-f2-zetec-sump-kit-neil-dunne/

and

https://www.neildunnewelding.co.uk/fuel-tanks-and-sumps/

Thanks,
Matt

View User's Profile View All Posts By User U2U Member
femster87

posted on 15/12/18 at 04:58 PM Reply With Quote
https://www.kitspares.co.uk/index.php?route=product/product&path=_8&product_id=1190
View User's Profile View All Posts By User U2U Member
steve m

posted on 15/12/18 at 05:19 PM Reply With Quote
I have no knowledge of the parts you require, but I will say, that the work that Neil has done for me, over the years has been faultlessly perfect!!

Plus helped by the fact, hes workshop is only 8 miles away from me

steve





Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at




View User's Profile View All Posts By User U2U Member
cliftyhanger

posted on 15/12/18 at 06:17 PM Reply With Quote
And a really good bloke to boot.
His stuff is used a lot on oval track racing. It must work well or it wouldn't sell.

View User's Profile View All Posts By User U2U Member
chris

posted on 16/12/18 at 12:34 PM Reply With Quote
i have one of his sumps and it is better quality than the others i have seen and no fettling required

[Edited on 16/12/18 by chris]

View User's Profile E-Mail User View All Posts By User U2U Member
Regan_M

posted on 16/12/18 at 02:24 PM Reply With Quote
quote:
Originally posted by chris
i have one of his sumps and it is better quality than the others i have seen and no fettling required

[Edited on 16/12/18 by chris]


Great, did you contact him directly or buy through someone else?

View User's Profile View All Posts By User U2U Member
chris

posted on 16/12/18 at 04:15 PM Reply With Quote
its been a number of years i am sure a went direct i am building another engine and will need another sump so i will try to go direct again
View User's Profile E-Mail User View All Posts By User U2U Member
Regan_M

posted on 17/12/18 at 09:45 PM Reply With Quote
quote:
Originally posted by chris
its been a number of years i am sure a went direct i am building another engine and will need another sump so i will try to go direct again


Contacted Neil direct today, seems a very knowledgeable chap and I placed an order, he was making it today and should receive the end of this week.

Will provide feedback once received and installed.

Thanks
Matt

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.