Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Duratec throttle bodies hit tensioner
itsawindupuk

posted on 4/5/19 at 06:30 AM Reply With Quote
Duratec throttle bodies hit tensioner

Hi all, I have a duratec fitted to my MGB and I recently purchased a set of direct to head throttle bodies from race line.

They look great however I cannot fit the tensioner without having to machine it which may make it weaker.
I'm sure there was a slimline version of the tensioner somewhere but cannot find it.

Any suggestions?

Thanks

View User's Profile View All Posts By User U2U Member
flak monkey

posted on 4/5/19 at 07:43 AM Reply With Quote
Fit a manual one. The spring loaded ones are poop anyway.





Sera

https://www.facebook.com/sera.jay666

https://www.facebook.com/SJEAmerican/

View User's Profile View All Posts By User U2U Member
itsawindupuk

posted on 4/5/19 at 01:12 PM Reply With Quote
Ah OK. Is it an off the shelf component or should I make one?
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.