skidude88
|
| posted on 12/11/06 at 01:00 PM |
|
|
Small weld job
Anyone a dab-hand welding thin piping?
Would like the majority of the bend cutting out of these water connectors.
Beer vouchers available
 
Original water connectors
Cheers,
Early MK de-Dion CBR1000 FJ-FP.
|
|
|
|
|
Peteff
|
| posted on 12/11/06 at 01:34 PM |
|
|
If you're stuck and can't get them done locally I'll do them. It's about 50 miles from here to Leicester. Cut a
'V' out to get them to the angle you want. You could cut the bend out and join them with coolant hose and clips.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
givemethebighammer
|
| posted on 12/11/06 at 04:01 PM |
|
|
I know a bloke round the corner from me who will do that for you drop me a U2U (I am in Mountsorrel near Loughborough)
|
|
|
Manic mechanic
|
| posted on 12/11/06 at 08:41 PM |
|
|
My mate in Enderby will do that for you, send me a u2u and I will give you his phone number.
|
|
|
skidude88
|
| posted on 13/11/06 at 07:16 PM |
|
|
Cheers guys,
An alternative "might" have just occured.
If that doesn't come to anything, I'll get back to you kind gents 
[Edited on 13/11/06 by skidude88]
Early MK de-Dion CBR1000 FJ-FP.
|
|
|
NS Dev
|
| posted on 14/11/06 at 02:20 PM |
|
|
I can do it and I am in barwell if thats any use
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
athoirs
|
| posted on 15/11/06 at 09:08 PM |
|
|
Hi
See photo below... If your engine were a R1 it would be a perfect fit!!!
As you can see there are a few differences, one being the take off nipple..
Might be best just doing a cut and shut job.. Now if I had my new TIG!!..
[Edited on 15/11/06 by athoirs]
 
Rescued attachment P1010238.JPG
|
|
|
skidude88
|
| posted on 17/11/06 at 01:49 PM |
|
|
Cheers for the pic,
Was worth a try, like you say prob go for cut'n'shut.
Early MK de-Dion CBR1000 FJ-FP.
|
|
|
