Installing metalistic bushes 6/8/19 at 12:04 PM
Wanted - simple lathe work 8/7/19 at 03:00 PM
Post build clear out 1/7/19 at 06:31 PM
Supplier needed for exahust silencer fabrication 28/6/19 at 12:31 PM
IVA Pass - Livingston 24/6/19 at 06:16 PM
Fury and JK composites seats 24/6/19 at 06:07 PM
R1 5pw oil connections 18/6/19 at 10:03 PM
Prop tube diameter 16/6/19 at 04:05 PM
Switching from shocks with bushes to shocks with sphericals - ride quality 24/5/19 at 10:43 AM
Trackday geometry set up for Fury 3/5/19 at 07:27 PM
Emissions test probe - how far into tailpipe? 1/5/19 at 11:14 AM
Fitting Sierra push in shafts 14/4/19 at 08:00 PM
Vin plate 19/2/19 at 08:06 PM
R1 manifold glowing in the dark at idle 30/1/19 at 12:33 PM
Transporting a kit in Luton van 22/1/19 at 10:11 AM
Setting emissions with a wideband lambda 22/1/19 at 10:01 AM
BEC emissions, Glasgow 16/1/19 at 10:51 AM
Fog light mounted on roll bar - IVA ok? 11/1/19 at 10:13 PM
Small 3d printed part required 2/1/19 at 07:17 PM
Hazard tell tale - flashing out of sync with lights 16/10/18 at 08:16 PM
[Next 20]
Search returned 241 threads

go to top

Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.