steve wheeler-smith
|
 posted on 11/2/04 at 09:45 PM |
|
|
Roadster 7 seats
Help i am getting a bit stressed Eric!!! Has anyone fitted these seats into their chassis? because in every ad i look at the width dimentions are
different. Can one of you please measure them for me and let me know how wide the base is as i am struggling to find seats for my car.
The width of my chassis between outer rail and trans tunnel is 430mm.
Cheers.
|
|
|
|
|
200mph
|
| posted on 11/2/04 at 10:06 PM |
|
|
the seats offered by darren@gts are 400mm across the base.
www.gtstuning.co.uk
regards
Mark
|
|
|
steve wheeler-smith
|
 posted on 11/2/04 at 10:09 PM |
|
|
Have you seen them i wouldn.t be able to tour France in them, look a bit harsh round the buttox area!!!!!
|
|
|
200mph
|
| posted on 11/2/04 at 10:22 PM |
|
|
touring?? you never said...
430mm is about 17.3 inches, so am pretty sure the cobra 7's will fit. ask a supplier, they will be more than happy i think
mark
|
|
|
steve wheeler-smith
|
| posted on 11/2/04 at 10:26 PM |
|
|
Cobra say they are 445mm yet Merlin say they are 440, i dont want to end up with aset of seats i cant fit. thanks
|
|
|
bob
|
| posted on 11/2/04 at 10:44 PM |
|
|
I've seen a load of locosts and MK's using the roadser 7's,they seem the perfect fit too.
One of the 1st upgrades i'll do is probably fit some myself
|
|
|
steve wheeler-smith
|
| posted on 11/2/04 at 10:48 PM |
|
|
Cheers Bob, I think i am going to bite the bullet and go for it. They do look great when they are fitted.
|
|
|
Viper
|
| posted on 11/2/04 at 10:49 PM |
|
|
I can recomend the Richfield RX777
Tim.
|
|
|
steve wheeler-smith
|
| posted on 11/2/04 at 10:51 PM |
|
|
Do they have a web site? Are they expensive?
|
|
|
bob
|
| posted on 11/2/04 at 11:13 PM |
|
|
If you want the cobras,do a search for xtreme motorsport they have shops all over and seem to have the best prices for roadster 7's.
I got a quote for black and black piping with harness slots in the top for £290 a pair,you have to pick up from shop but this is how they do it
cheaper.
|
|
|
bob
|
| posted on 11/2/04 at 11:15 PM |
|
|
sorry found it
http://www.xtreme.uk.com/
|
|
|
locoboy
|
| posted on 12/2/04 at 09:21 AM |
|
|
just looked at that link and there is no mention of cobra seats on there, or even after a search for seats, it showed nothing at all!?
is this the right place?
ATB
Locoboy
|
|
|
PioneerX
|
| posted on 12/2/04 at 12:56 PM |
|
|
If your looking for cobra roadster 7's I've just taken delivery of mine from Adrian @ evolutionuk@dsl.pipex.com. Great service & great
price.
If you need any dimentions I can post, however I have a book chassis and the seats fit with about 1/2 inch of movement on each side and 1.5 inch spare
space around the base (as the base is smaller than the sides due to the bolster).
If you look at getting them, drop Adrian a line you wont be disappointed.
No connection to Adrian, just a very satisfied customer.
|
|
|
locoboy
|
| posted on 12/2/04 at 04:57 PM |
|
|
more expensive with adrian at £320 with black piping and harness slots and £330 with coloured piping and the slots.
ATB
Locoboy
|
|
|
Mix
|
| posted on 12/2/04 at 06:35 PM |
|
|
Another satisfied customer!
I bought my roadtster 7s through a group buy on here and am very impressed.
Mick
|
|
|
rusty nuts
|
| posted on 12/2/04 at 07:08 PM |
|
|
roadster 7 seats
If you want to try them for size and measure them your self I'm just down the road in Cambridge , my car is in Bar Hill about a 20 minute drive
from Bury . Will probably be working on car sat / sun. Rusty
|
|
|
steve wheeler-smith
|
| posted on 12/2/04 at 08:30 PM |
|
|
The seats from Adrian, does the 320 include vat?
|
|
|
bob
|
| posted on 12/2/04 at 08:33 PM |
|
|
quote:
Originally posted by colmaccoll
just looked at that link and there is no mention of cobra seats on there, or even after a search for seats, it showed nothing at all!?
is this the right place?
click on nearest dealer and phone the shop
|
|
|
.jpg)
