200mph
|
| posted on 31/7/09 at 04:14 PM |
|
|
Pretty much everything - UPDATED 02/08/09
Family circumstances have given me a curse and a blessing - short story is I'll be buying a car soon but can no longer build one.
As such everything I have will be going I reckon. From the top of my head (not near the garage) I have:-
LHD rolling chassis originally destined for a French locost racing series. Chassis has been galvanised at reputable company, has full roll cage, front
upper & lower wishbones, front hubs & uprights (no calipers fitted), steel floor, alu panels to sides, brake pipes, rear axle (no diff
fitted). Probably best I attach some pics which I shall get round to tomorrow, but didn't want to exclude from this post. Hoping for around
£450.
Brand new 2.0 litre blacktop zetec engine, bought from Great British Sportscars/kitcarpartsdirect. Still on pallet, top packaging removed so I could
look at it but all wrapped up still. Cost me £690+ delivery, will take £600+delivery.
Engine mounts for zetec, £35
Engine mounts for xflow (from Luego), - £30
Type 9 gearbox, £50
White GRP scuttle (new) from GTS to fit standard locost, £95
1700 xflow block, not touched since it was bored (711 block) - offers?
Panhard rod from luego, £15
Carbon can co R6 racing can in purple/blue, £30
Luego (locost) rollbar including horizontal and diagonal bracing as shown in the last pic in my archive, £35
Upper sierra steering column inc wheel and collapsable section (pic in archive), £30 (also have lower section to mount to rack for £10)
Type 2 escort gearbox, exchanged for a packet of biscuits. Same with single piece propshaft from donor vehicle.
Griffin racing inlet manifold, sees a 30hp gain on standard, £80 (more info http://www.griffinpower.co.uk/html/total.htm) - SOLD PENDING
PAYMENT
Wing mount stays by GTS, £30 - SOLD PENDING PAYMENT
Black nosecone, fits book chassis, £30 - SOLD PENDING PAYMENT
Escort steering rack in excellent condition - suspect it's a quick rack but not sure (anyone know how I tell?) As such, £25 - PROVISIONALLY
SOLD
Big valve xflow head, I think 39mm/34mm valves and ported. £80 - PROVISIONALLY SOLD
1.3l xflow with attached gearbox (no carb fitted but could probably supply), unknown spec but came with chassis and was destined for racing series,
£50 - PROVISIONALLY SOLD
4:1 stainless exhaust manifold to suit the above. Excellent condition, £130 - FIRST DIBS TAKEN
All of the above +postage, or could possibly deliver some.
I'm struggling to think of other stuff, even though there is loads. I have some calipers arriving from alfasudsprint (I had planned on using
them alfa, sorry for selling them on) but will update the list once I have a looksy round the garage.
Will take care of photos etc tomorrow.
Cheers
Mark
[Edited on 2/8/09 by 200mph]
If it isn't broke, fix it until it is
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
big_wasa
|
| posted on 31/7/09 at 04:24 PM |
|
|
I am interested in the grifin manifold and the gts wing stays
Do I get combined discount ? 
|
|
|
hughpinder
|
| posted on 31/7/09 at 04:25 PM |
|
|
u2u sent re rack.
Thanks
Hugh
|
|
|
200mph
|
| posted on 31/7/09 at 04:28 PM |
|
|
quote:
Originally posted by big_wasa
I am interested in the grifin manifold and the gts wing stays
Do I get combined discount ?
Of course!!
£100 for both, and I'll wrap them extra good
If it isn't broke, fix it until it is
|
|
|
big_wasa
|
| posted on 31/7/09 at 04:31 PM |
|
|
Forgot to ask if the stays are sierra or cortina uprights.
If cortina both sold
u2 me with postage and payment details
cheers
|
|
|
200mph
|
| posted on 31/7/09 at 04:35 PM |
|
|
Yup they're cortina ones.
U2U in transit.
Mark
If it isn't broke, fix it until it is
|
|
|
prawnabie
|
| posted on 31/7/09 at 05:25 PM |
|
|
U2U sent ref Xflow head
|
|
|
handyandy
|
| posted on 31/7/09 at 06:27 PM |
|
|
U2U sent.
andy
|
|
|
l0rd
|
| posted on 31/7/09 at 06:46 PM |
|
|
INTERESTED!!!!!!!!!!!!!!!!!!!!!! FOR QUITE A FEW COMPONENTS
CHASSIS DIMENSIONS plzzzzzzzzzzzzzzz
Cabin width, anything you can think of.
[Edited on 31/7/09 by l0rd]
|
|
|
200mph
|
| posted on 31/7/09 at 06:51 PM |
|
|
replied Andy
l0rd - will get some measurements. Anything in particular?
EDIT: my tape measure has gone walkies - another job for tomorrow.
Cheers
Mark
[Edited on 31/7/09 by 200mph]
If it isn't broke, fix it until it is
|
|
|
l0rd
|
| posted on 31/7/09 at 06:59 PM |
|
|
could you send me a phone number?
|
|
|
200mph
|
| posted on 31/7/09 at 07:07 PM |
|
|
yoo too yoo'd
If it isn't broke, fix it until it is
|
|
|
Barronge
|
| posted on 31/7/09 at 09:31 PM |
|
|
U2Ud
|
|
|
tcc21racing
|
| posted on 31/7/09 at 09:38 PM |
|
|
u2u sent
|
|
|
mcerd1
|
| posted on 1/8/09 at 07:44 AM |
|
|
I'll take the 1.3 xflow if its still avalible
-
|
|
|
200mph
|
| posted on 1/8/09 at 09:01 AM |
|
|
it is indeed mate. do you plan to collect?
Cheers
Mark
If it isn't broke, fix it until it is
|
|
|
mcerd1
|
| posted on 1/8/09 at 09:04 AM |
|
|
can do, if I can get a hand to lift it into a van
where abouts is it ?
(I might even be able to get it today  )
u2u sent
[Edited on 1/8/09 by mcerd1]
-
|
|
|
200mph
|
| posted on 2/8/09 at 02:42 PM |
|
|
Edited with some slightly reduced prices, a couple of more items and pics in my archive. Apologies for poor quality and lack of presentation, time
pressures taking their toll.
Will look into postage costs for interested parties tomorrow, and get some proper pictures to each.
Cheers
Mark
If it isn't broke, fix it until it is
|
|
|
damdy-cash
|
| posted on 2/8/09 at 06:17 PM |
|
|
U2U send re gearbox
|
|
|
200mph
|
| posted on 3/8/09 at 06:53 PM |
|
|
Pictures of the lot have been saved in http://img231.imageshack.us/gal.php?g=carpics016.jpg
Cheers
Mark
If it isn't broke, fix it until it is
|
|
|
