lotusmadandy
|
| posted on 13/9/09 at 06:18 PM |
|
|
My engine has gone
My 2 litre pinto has gone to its new home
today.
I was quite sad to see it being driven
away in Neil's (yorkie's) car.
so i want to thank Neil for buying the engine and thank, Steve(coozer)
and Mike(guiness) for coming over and helping Neil and me to remove it from my MK.
It was quite amusing at times all four of us
fighting over the same bolt
The four of us had it out, mounted on a wooden frame and into Neils boot in about an hour,
Some good banter was had too.Need to get the zetec in the hole now.
Thanks lads I couldnt have done it without
you all.
Andy
|
|
|
|
|
Guinness
|
| posted on 13/9/09 at 06:32 PM |
|
|
No problem. Was a good laugh and shows how much 4 pairs of hands can achieve in such a short time!
Before:-
.JPG)
After:-
.JPG)
Hope the carpet dries out soon!
Have you not got the new engine in yet?? 
Mike
|
|
|
omega0684
|
| posted on 13/9/09 at 06:42 PM |
|
|
it took 4 of you to take a pinto out!  i did mine on my own in the garage, mind you an extra pair of hands would have been handy at times!
has he took the exhaust as well? are you aware that the zetec exhaust ports are on the opposite side to the pinto, so your exhaust will now run down
the passenger side and not the drivers side
[Edited on 13/9/09 by omega0684]
[Edited on 13/9/09 by omega0684]
|
|
|
lotusmadandy
|
| posted on 13/9/09 at 06:47 PM |
|
|
New one in yet
the carpet is begining to dry out,
Thats what happens when you pop the hose pipe off the tap before turning it off
I dont know about Steve though after lying down in it.
Andy
[Edited on 13/9/09 by lotusmadandy]
|
|
|
coozer
|
| posted on 13/9/09 at 06:50 PM |
|
|
Ha! four of us fighting over spanners to remove bolts and elbowing each other out the way...
Even though Andy's bottom lip was flapping it was great to get together.. even tho I had to drive back in the rain
1972 V8 Jago
1980 Z750
|
|
|
lotusmadandy
|
| posted on 13/9/09 at 06:52 PM |
|
|
Yes, Neil took the exhaust, inlet manifold,fuel pump and ignition system.
I bought the new zetec zorst from me mate coozer,so will be posting for ideas to fill/cover the hole in the bonnet.Any ideas?
Andy
|
|
|
Yorkie
|
| posted on 13/9/09 at 07:17 PM |
|
|
My new engine has arrived safe and sound.
Many thanks to Andy, Steve and Mike.
Enjoyed the banter, will keep you posted on how the build is going.
Neil
|
|
|
austin man
|
| posted on 13/9/09 at 08:08 PM |
|
|
Silver top or black top Zetec ?? if its the silvertop you may need to make some mods to the steering as it fouls the oil filter. My Locost is
4" wider than standard and still required modification to miss the oil filter
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
prawnabie
|
| posted on 13/9/09 at 08:17 PM |
|
|
I hope the fluids didn't go down the drain!
|
|
|
omega0684
|
| posted on 13/9/09 at 08:47 PM |
|
|
from the looks of your pictures i would say that you have a large-ish hole where the exhaust came out, is there any way that you could use that hole
as an intake for cold air to the intake for the zetec otherwise new bonnet?
|
|
|
kj
|
| posted on 14/9/09 at 07:09 AM |
|
|
Just as well the good weather has gone, hope you get the new one in soon.
Thanks for the spin as my engine should be the same spec it should be entertaining.
good luck
|
|
|
.jpg)
