MikeFellows
|
| posted on 9/7/10 at 08:28 AM |
|
|
Show me your front grill (7 style)
What mesh did you use on the front grill and what would you use now?
not to be awkward but this thread is useless without pics 
[Edited on 9/7/10 by MikeFellows]
|
|
|
|
|
dan__wright
|
| posted on 9/7/10 at 08:46 AM |
|
|
its chavvy mesh from halfords, would use again! was a bit expensive though
FREE THE ROADSTER ONE…!!
|
|
|
big-vee-twin
|
| posted on 9/7/10 at 09:08 AM |
|
|
Got mine from a car custom place in the net, but essentially the same
 
Nosecone Grille
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
Humbug
|
| posted on 9/7/10 at 09:08 AM |
|
|
Stainless mesh grill fixed to bolts fibreglassed behind the return of the opening in the nose.
7 made from ali sheet (printed a scaled-up photo of a Cateringvan grill, stuck it to the ali, screwed the ali to plywood for support, and cut with a
jigsaw, fixed with silver/grey cable ties)
 
Rescued attachment 2008-01-20 8 ST front.JPG
|
|
|
dan8400
|
| posted on 9/7/10 at 09:31 AM |
|
|
Mines the same mesh as humbug but no badges
Dan
Hey - That's Journey!!!
|
|
|
mads
|
| posted on 9/7/10 at 10:05 AM |
|
|
one tip - if you want a black mesh grill, then buy one that comes black. dont be cheap and buy a metal one which you then have to hammerite. it just
doesnt look that good!!
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
Danozeman
|
| posted on 9/7/10 at 10:39 AM |
|
|
Standard Luego bars for me.
 
Description
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
Marcus
|
| posted on 9/7/10 at 11:53 AM |
|
|
 
car in France
Here's mine...used mesh and bars just to be different
Marcus
Because kits are for girls!!
|
|
|
David Jenkins
|
| posted on 9/7/10 at 12:08 PM |
|
|
Mine uses the same mesh as on Humbug's car.
One thing - don't be tempted to use anything that restricts the air - these cars have enough trouble getting cool air over the radiator without
making it even harder!
|
|
|
Hugh_
|
| posted on 9/7/10 at 06:26 PM |
|
|
My attempt
 
Grill
|
|
|
rusty nuts
|
| posted on 9/7/10 at 09:19 PM |
|
|
<--- mine
|
|
|
MikeFellows
|
| posted on 18/7/10 at 01:06 AM |
|
|
thanks guys
some nice looking front ends there 
|
|
|
dlatch
|
| posted on 18/7/10 at 11:45 AM |
|
|
 
front
|
|
|
.jpg)
