brookie
|
posted on 23/9/10 at 06:42 PM |
|
|
dash (carbon fibre)
where it get 1 from for my indy i now mk do one for £100 but are there any cheaper places out there taht do them
|
|
|
RichardK
|
posted on 23/9/10 at 07:05 PM |
|
|
Resist the temptation to get the imitation board stuff, looks great and cuts great. Then when the sun comes out watch it bend like a banana! Great
selling something for exterior use thats not uv tolerant
Rich
Gallery updated 11/01/2011
|
|
bi22le
|
posted on 23/9/10 at 09:56 PM |
|
|
MAC1 do one. Not sure of price though
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
RK
|
posted on 23/9/10 at 10:02 PM |
|
|
sounds a fair price from what I've seen.
Mac#1 look good from pics, Carbon Mods are a bit more, Plays Kool does them in plastic for about 60 pounds though (sorry is this the type that
bend?)
Your own from MDF or something else are even less!!
[Edited on 23/9/10 by RK]
|
|
Yorkie
|
posted on 24/9/10 at 07:38 AM |
|
|
I bought a fibreglass dash panel and covered it with 3M di-noc.
Fibreglass dash panel cost between £30 and £50.
|
|
brookie
|
posted on 24/9/10 at 04:54 PM |
|
|
quote: Originally posted by Yorkie
I bought a fibreglass dash panel and covered it with 3M di-noc.
Fibreglass dash panel cost between £30 and £50.
where did u get that panel from then
also can i do one out off ally and then cover it in the carbon fibre m3 stuff off ebay
|
|
RichardK
|
posted on 25/9/10 at 01:30 PM |
|
|
quote: Originally posted by RK
sounds a fair price from what I've seen.
Mac#1 look good from pics, Carbon Mods are a bit more, Plays Kool does them in plastic for about 60 pounds though (sorry is this the type that
bend?)
Your own from MDF or something else are even less!!
[Edited on 23/9/10 by RK]
This stuff Linky
Gallery updated 11/01/2011
|
|
Yorkie
|
posted on 25/9/10 at 10:01 PM |
|
|
I got the grp dash blank from CBS, its advertised at £50 but I have seen it cheaper elsewhere.
3M vinyl from ebay.
|
|
RK
|
posted on 26/9/10 at 02:34 AM |
|
|
http://www.aerodynamix.co.uk/contact.html
one option
|
|
brookie
|
posted on 26/9/10 at 12:16 PM |
|
|
thank u all for your help
|
|
Rob E
|
posted on 30/9/10 at 07:10 PM |
|
|
Very neat job done on the dash ,does the dash roll slightly under at the bottom or is it a sharp end?
|
|
Yorkie
|
posted on 30/9/10 at 09:39 PM |
|
|
Thanks, the grp dash blank has the required 19mm radius at the bottom.
|
|