spiderman
|
| posted on 1/7/11 at 02:40 AM |
|
|
Ford RS Alloy Wheel Wanted
Wanted 1x Ford RS alloy wheel 5 1/2 x 13 eta 25mm with flat wheel nut seat.
I think that the laser alloys from a Capri have dished wheel nut holes, please correct me if I am wrong. I am not sure but I think my wheels came off
of an escort and are early RS type if anyone can enlighten me please do and if anyone has one for sale I would be interested in buying one for a
spare.
Many thanks.
Spider.
Spider
|
|
|
|
|
madteg
|
| posted on 1/7/11 at 05:50 AM |
|
|
Got set of four just been shot blasted ready foor paint you can have all four for £40.
|
|
|
Confused but excited.
|
| posted on 1/7/11 at 01:06 PM |
|
|
 I'd rip your arm off if you weren't so far away.
Tell them about the bent treacle edges!
|
|
|
spiderman
|
| posted on 1/7/11 at 03:02 PM |
|
|
quote:
Originally posted by madteg
Got set of four just been shot blasted ready foor paint you can have all four for £40.
U2u sent.
Spider
|
|
|
spiderman
|
| posted on 1/7/11 at 03:11 PM |
|
|
Hi guys,
I am probably going to use one of my steel wheels to go into my spare wheel carrier as this will double up as rear crash protection for IVA as fuel
tank mounts on the luggage compartment stays. I will then have to make a spacer for the steel wheels so that the wheel nuts tighten fully on my
extended wheel studs.
So if anyone is interested in "MADTEGS" offer of 4 alloys please feel free to do so as I am going to pass on the offer.
All the best to everyone in their endevours.
Spider.
Spider
|
|
|
