bigbravedave
|
| posted on 27/1/12 at 09:20 PM |
|
|
Recomend me an exhaust manufacturer for these pipes please!
Im after 3 sections of 1-3/4" OD stainless tube for an exhaust system. given the choice I would rather not weld a number of sections together if
there is somewhere with a CNC bender set up for 1-3/4" tube or similar not to fussed what the bend rad is. I forwarded this sketch with
intercept bend tables to a friend in the business a few months ago but nothings materialised! and the car its destined for is running beautifully but
needs these pipes with some small silencers Ive got to tuck the exhaust up and greatly improve ground clearance.
So can anyone recommend somewhere that can make these in stainless ideally within a week?!
It's always the way, had I realised sooned I wouldn't have sold my own tube bender!
[img] [/img]
|
|
|
|
|
Gary 7
|
| posted on 27/1/12 at 10:36 PM |
|
|
Just found this company. not used them myself. I had a couple pipes mandrel bent by pipe werx a few years ago.
http://www.ojzengineering.co.uk/product_index.php?product=1
|
|
|
simonwinn
|
| posted on 27/1/12 at 10:40 PM |
|
|
I have used OJZ engineering for a link pipe on my last build, very friendly people and top quality work too.
|
|
|
snapper
|
| posted on 28/1/12 at 08:13 AM |
|
|
Paul Gooderham
An artist in metalPaul Gooderham
[Edited on 28/1/12 by snapper]
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
franky
|
| posted on 28/1/12 at 09:05 AM |
|
|
http://www.tubeengineers.co.uk/
|
|
|
