w4lrus
|
| posted on 24/3/12 at 11:03 PM |
|
|
R1 Breather Mod quick question...
...well I hope it's a quick question anyway!
I have carried out the breather mod as detailed elsewhere, but I am wondering if I need to put anything on top of the old reed valve plate, under the
cover, like gauze perhaps? Or am I ok to just put the the covers back on and connect to the catch tank (when I have one, when I have the car to put it
in!)
|
|
|
|
|
kjouk
|
| posted on 26/3/12 at 07:59 AM |
|
|
I didn't on mine, just let it vent to a catch tank.
|
|
|
adithorp
|
| posted on 26/3/12 at 08:47 PM |
|
|
I folded some fine stainless mesh to fit in the "baskets" under the plate for any oil mist to condense on and drain back. Never get
anything other than a few cc's of oily water (condensation) in the bottle if doing a lot of short runs. Nothing at all on track or a long run.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
w4lrus
|
| posted on 27/3/12 at 12:38 PM |
|
|
Thanks for the info, I'll find some stainless gauze, and do the same
|
|
|
