Dooey99
|
| posted on 27/12/12 at 06:41 PM |
|
|
ZETEC COOLING SYSTEM DIAGRAM
After Searching high and low for a decent Zetec cooling diagram, i gave up. i ended up making it up and using trial and error trying to find the best
way to arrange the hoses and so on. this is what i finally came up with, my engine is a 1.8 zetec black top but this should work for any zetec engine,
there is no need to change the water pump so it pumps the other way leave it with a standard pump.
|
|
|
|
|
AndyW
|
| posted on 27/12/12 at 08:16 PM |
|
|
Save yourself some hose and just blank the top rad small outlet that's what I did and works fine.
|
|
|
gavin174
|
| posted on 27/12/12 at 08:45 PM |
|
|
what rad are you using..
obviously not polo as the outlets are on different sides..
http://www.essexkitcarclub.com
|
|
|
Dooey99
|
| posted on 27/12/12 at 08:48 PM |
|
|
I'm using an escort mk2 rad and just leaving the radiator cap on and sealing it properly.
|
|
|
whitestu
|
| posted on 27/12/12 at 09:35 PM |
|
|
quote:
Save yourself some hose and just blank the top rad small outlet that's what I did and works fine.
+1.
|
|
|
alladdin
|
| posted on 27/12/12 at 10:03 PM |
|
|
any reason you didnt or could,nt T the two red hoses at the expansion tank ?
|
|
|
paulf
|
| posted on 27/12/12 at 11:09 PM |
|
|
My car has been plumbed like that for a few years with no problem, but people seem to think that you need 2 separate hoses for some unknown reason.
Paul
quote:
Originally posted by alladdin
any reason you didnt or could,nt T the two red hoses at the expansion tank ?
|
|
|
Paul Turner
|
| posted on 28/12/12 at 10:05 AM |
|
|
My diagram is about 1/2 way down this tread and was kindly posted for me by Lewis.
http://www.locostbuilders.co.uk/forum/9/viewthread.php?tid=161780
Has worked perfectly since 2001.
|
|
|
.jpg)
