ianhurley20
|
| posted on 18/10/14 at 06:05 PM |
|
|
MX 5 bits
Hi everyone - I have a Pinto engined Haynes that I am converting to a Mazda engined unit. As a result I have a 1998 1.6 Mk 2 MX5 that I am taking
apart. I want the engine, gearbox, propshaft, electrics, seats, brake and clutch master cyls and steering column and probably a few other odd bits but
I do not need any suspension, front or rear, brake disc, caliper, 14" alloys with nearly new tyres, rack or many other parts. A lot of them
(doors bonnet boot lid etc) will find their way onto ebay I guess but if there are any parts you want for your project I'm not using please
ask.
I am in North Norfolk near the town of Holt.
I have not got round to taking them out yet but I will also have a 2.0l Pinto engine with shortened sump and e series 4 speed gearbox as well if
anyone is interested in a week or so.
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
coozer
|
| posted on 18/10/14 at 06:55 PM |
|
|
Bugger, if only it was mk1... Looking for all 4 corner uprights and rack off a mk1...
1972 V8 Jago
1980 Z750
|
|
|
big_wasa
|
| posted on 18/10/14 at 07:06 PM |
|
|
Yeh I want a mk1 rack to play with as well, but not until after xmas.
|
|
|
coozer
|
| posted on 18/10/14 at 07:41 PM |
|
|
quote:
Originally posted by big_wasa
Yeh I want a mk1 rack to play with as well, but not until after xmas.
Do you want it to see if it works as manual following the book instructions?
1972 V8 Jago
1980 Z750
|
|
|
alfablack
|
| posted on 18/10/14 at 08:35 PM |
|
|
Hi Chaps sorry to hijack this
but we have a full set of uprights complete with shafts.
and a couple of racks for the mk1 mx5
|
|
|
coozer
|
| posted on 19/10/14 at 10:47 AM |
|
|
How much?
1972 V8 Jago
1980 Z750
|
|
|
ianhurley20
|
| posted on 20/10/14 at 07:58 AM |
|
|
Some parts now listed on ebay, if you start with this one it will link to the others
MX5 Mk2/2.5 OFFSIDE (DRIVERS) DOOR COMPLETE
|
|
|
