alfas
|
| posted on 9/7/15 at 08:50 PM |
|
|
seats with headrest for MK4 clubman / phoenix
can anybody tell me which (affordable) seats, with headrest will fit a MK4 clubman/phoenix? or any other ideas?
the car is planed to be used as a race-car only, so it should be something supporting, as well safe (headrest).
i ask the question cause the cockpit area of those cars is really narrow.
[Edited on 9/7/15 by alfas]
|
|
|
|
|
jeffw
|
| posted on 9/7/15 at 09:01 PM |
|
|
Tillett B3.5
https://www.tillett.co.uk/shop/shopdisplayproducts.asp?id=31&cat=B3.5+Racing+Car+Seat
[Edited on 9/7/15 by jeffw]
|
|
|
alfas
|
| posted on 9/7/15 at 10:53 PM |
|
|
i know those, but would prefer something less expensive.....
|
|
|
kitcardirect
|
| posted on 10/7/15 at 07:15 AM |
|
|
We have just developed this race seat,
Andy at Ab performance has these in his new Arion race cars,
super light very strong and base fixings for runners,
narrow at only 36 cm wide
link for you
http://www.kitcardirect.co.uk/fibre-glass-grp-narrow-high-back-seat-shell-caterham-striker-version.html
any questions give us a shout
thanks
KCD
http://www.kitcardirect.co.uk/
Follow Us On Facebook : http://on.fb.me/1KYgL8N
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
peter030371
|
| posted on 10/7/15 at 10:29 AM |
|
|
Many, myself included, have used these with some success.
http://www.jkcomposites.com/7s-page.html
They are a little snug around the hips for some which is why I have been looking at alternatives recently which are slightly lower cut around the hip
area but I am still looking (and in the meantime I will build my car up with JK seats because I already have a new pair  )
|
|
|
alfas
|
| posted on 21/7/15 at 06:39 PM |
|
|
quote:
Originally posted by kitcardirect
We have just developed this race seat,
Andy at Ab performance has these in his new Arion race cars,
super light very strong and base fixings for runners,
narrow at only 36 cm wide
link for you
http://www.kitcardirect.co.uk/fibre-glass-grp-narrow-high-back-seat-shell-caterham-striker-version.html
any questions give us a shout
thanks
KCD
do you have some measurements for me?
due to our race-rules the seat will be directly bolted to the floor (without runners) and will have at least 15cm gap to the rear bulkhead (as my legs
are rather short)...means vice-versa, the seat will be mounted far at front (phoenix gets narrower at front).
do i need extra support for the backrest, as its not in contact / supported from anything?
my favourites are kirkey seats....does a 14" kirkey seat fit??
[Edited on 21/7/15 by alfas]
|
|
|
